Solvent - Borne PU, PTU - Pellet, Polyester Polyol
Product ID: EBF-80A, EBF-85A, EBF-90A, EBF-95A
Send InquirySpecifications
.Thermoplastic polyurethane elastomersFeatures
- Our web site is www.coating.com.tw
- Solvent-borne PU: synthetic leather, textile coating adhesives.
- TPU-Pellet: Tubes, Wire & Cable, Shoe-sole, Rollers.
- Low temp flexibility and hydrolysis resistance. Non-yellowing
- Good processibility. Abrasion and tear resistance
- PU Type: Hybrid polymer base
- Moulding: Calendering or blow moulding
- Product Characteristics:
- High tensile strength and elongation
- Anti-blocking and good roll release
- Good melt, controlled viscosity
- Product Applications: conveyor belt, fabric laminates, sheet, film grade
| Product | EBF-80A | EBF-85A | EBF-90A | EBF-95A |
|---|---|---|---|---|
| Hardness Shore A | 80 +/- 2 | 85 +/- 2 | 90 +/- 2 | 95 +/- 2 |
| Specific Gravity | 1.22 | 1.22 | 1.22 | 1.22 |
| 100% Modulus (kg/cm^2) | 50 +/- 5 | 70 +/- 5 | 85 +/- 5 | 100 +/- 5 |
| 300% Modulus (kg/cm^2) | 120 +/- 15 | 170 +/- 15 | 190 +/- 20 | 270 +/- 30 |
| Tensile Strength (kg/cm^2) | 500 +/- 100 | 600 +/- 100 | 600 +/- 100 | 600 +/- 100 |
| Ultimate elongation (%) | 650-750 | 600-700 | 600-700 | 500-600 |
| Taber Abrasion (mg) | 30-40 | 30-40 | 30-40 | 30-40 |
| Melt Index (g/10min, 200 Celsius, 2160g) | 11-13 | 10-12 | 9-11 | 8-10 |
| Melt temp (Celsius) | 185-200 | 190-205 | 190-210 | 195-215 |
| Tear Strength (kg/cm^2) | 120 +/- 5 | 145 +/- 5 | 160 +/- 10 | 175 +/- 10 |
Main Products
PU resin, TPU-Peuet