The backlash setting and the pre-tensioning of the rollers takes place via the eccentric hub of the rollers of the series FR.., FR..R or LR.., LR..R.
The FR..Z and LR..Z series are the concentric models. In the eccentric rollers, the inner bolts are provided with two holes. These allow for the adjustment of the backlash. If a roller is located in its zero position, the teeth backlash will be the standard value of 0.05 mm flank clearance.
The service life of the system will be reduced by excessive tensioning. With too little tension the rollers will not run, or will wear due to the poor meshing.
More information:http://www.yi-tong.com/yi-tong/en/plain_roller.htm
The FR..Z and LR..Z series are the concentric models. In the eccentric rollers, the inner bolts are provided with two holes. These allow for the adjustment of the backlash. If a roller is located in its zero position, the teeth backlash will be the standard value of 0.05 mm flank clearance.
The service life of the system will be reduced by excessive tensioning. With too little tension the rollers will not run, or will wear due to the poor meshing.
More information:http://www.yi-tong.com/yi-tong/en/plain_roller.htm
Main Products
Track Roller, Cam Roller, Cam Rollers, Guide Wheels, Linear Rail, Linear Motion Bearings, Linear Slide, Track Roller, Track Rollers, Track Roller Bearing, Track Rollers, Track roller, Guide wheels, Guide wheel, Journal Bearings, Journal Bearing, Vee' d Bearing, Vee' d bearings
Contact Detail
-
CEOQinjian Ye
-
Sales ContactAmos Zhang
-
AddressNo.1, Yitong Road, Zhenhai Ningbo, 315221 China
-
Tel86-574-86303188 / 86305533
-
Fax86-574-86303168 / 86305521
-
E-mail
-
URL