Good Hand Enterprise Co., Ltd.
High strength steel construction and precisely broached body for square plunger, allow these clamps to be used as pin locating gauges.
Hardened steel pins and bushing fitted at pivot points.
Supplied with separate handle and base.
Users can weld them ate desired postion.
Clamps can be mounted by drilling holes on the base or be welded at a proper position.
Hardened steel pins and bushing fitted at pivot points.
Supplied with separate handle and base.
Users can weld them ate desired postion.
Clamps can be mounted by drilling holes on the base or be welded at a proper position.
Specifications
- Weight: as below
- Holding Capacity: as below
- Spindle Supplied: as below
- Bar Opens: as below
- Plunger Stroke: as below
| Model | Weight (g) | Holding Capacity (kg) | Spindle Supplied | Plunger Stroke | A | B | C | D | E | F | G | H | I | J | ØK | L |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| GH-30509M | 1,330 | 1,136 | GH-SA-125017 | 46 | 25.4 | 19 | M12 P=1.75 | 50.8 | 150 | 34.9 | 74 | 30 | 8 | 70 | 21.7 | 152.4 |
| GH-30609M | 2,820 | 2,273 | GH-SA-165020 | 59.5 | 38.1 | 25 | M16 P=2 | 68.3 | 198 | 44.4 | 87 | 40 | 8 | 90.5 | 27.2 | 152.4 |
Main Products
Vertical Handle Toggle Clamps, Horizontal Handle Toggle Clamps, Push/Pull Toggle Clamps, Latch Type Toggle Clamps, Toggle Pliers, Heavy Duty Weldable Toggle Clamps, F Type Clamps, C Clamps, Air Powered Clamps, F Clamps, Gear Puller, Shark Clamps