| Description / model | Unit | SCLP-2-300 | SCLP-2-400 | SCLP-2-500 | SCLP-2-600 | SCLP-2-800 |
|---|---|---|---|---|---|---|
| Capacity | Ton | 300 | 400 | 500 | 600 | 800 |
| Tonnage rating point above | mm | 12 | 13 | 13 | 14 | 16 |
| Stroke length | mm | 400 | 450 | 500 | 600 | 650 |
| Stroke per minute | S.P.M | 10/20 | 10/20 | 10/20 | 10/18 | 10/15 |
| Die height | mm | 750 | 800 | 900 | 1000 | 1100 |
| Slide adjustment | mm | 250 | 300 | 350 | 500 | 550 |
| Slide area (LR x FB) | mm | 2500 x 1400 | 2500 x 1500 | 2700 x 1500 | 2800 x 1500 | 3100 x 1600 |
| Bolster area (LR x FB) | mm | 2500 x 1600 | 2500 x 1600 | 2700 x 1600 | 3000 x 1600 | 3200 x 1600 |
| Bolster thickness | mm | 200 | 210 | 220 | 250 | 280 |
| Main motor (V.S) | KW | 45 | 55 | 55 | 75 | 90 |
| Slide adjustment motor | KW x P | 1.5 x 6 | 5.5 x 6 | 5.5 x 6 | 7.5 x 6 | 7.5 x 6 |
| Air pressure | kg/cm^2 | 5 | 5 | 5 | 5 | 5 |
| Die cushion / capacity | Ton | 60 | 80 | 80 | 120 | 150 |
| Die cushion / type | N/A | 1 pad, 2 cylinder | 1 pad, 2 cylinder | 1 pad, 2 cylinder | 1 pad, 2 cylinder | 1 pad, 2 cylinder |
| Die cushion / stroke length | mm | 210 | 250 | 250 | 250 | 300 |
| Die cushion / pad area (LR x FB) | mm | 1750 x 700 | 1900 x 800 | 2000 x 850 | 2500 x 1100 | 2600 x 1100 |
| Die cushion / Stroke length ADJ | mm | 20 x 210 | 20 x 250 | 20 x 250 | 20 x 250 | 20 x 300 |
Features
- Moving bolster line
- A comprehensive technique of press the crank press has the frame of highly hard, and long stroke length as well as high precision!
- Electronic type angle sequence. Easy to perceive the abnormality of machine as it has equipped the safety monitor inside. Even for the cam angle could be changeable to the extent of 15 ranges for transformation setting
- Strong eccentric load. In order to eliminate the eccentric load that might be generated in a big type press. It has been designed to have maximum length of pressing point of the lot and intense against the eccentric load.
- Safety block device. In order to have beforehead protect from the emergency condition in the course of the repair and various maintenance work, an ultimate safety device has been installed.
- Centralized operation system. It was designed and structured in a rational structure upon basic analysis of the every section for the operational engineering so as to get a view of each of the electrical control and mechanical operation condition, and so able to perform accurate operation.
- Automatic control memory device (option): position scale. Electronic memory could be controlled automatically by one touch to the extent of 99 for the dimensions of slide and die cushion part in consideration of the features of mould and products.
- Plunger guide system. Adopted the plunger guiding system to keep high precision and protect itself
- Wide side-opening. Designed the inlet (in-light) part in a four separated system and so secured the wide operational space
- Subject to modifications
- Making any special specification for in compliance with buyer's request
- Classification / standard:
- Operation method: hand
- Front portable box: move
- Angle sequence
- Slide adjustment
- Die height auto stop counter
- Overload protector
- Crank angle indicator
- Total counter
- Preset counter
- Counter balance
- Frame adhere control panel
- Air ejector
- Over run detector
- Coerce lubrication device
- Photo electric safety device
- 100 volt concent
- 220 volt concent
- Safety block
- Flywheel brake
- Yard light
- Classification / selection:
- Operation method: foot
- Slide air knock out device, air
- Die cushion
- Die cushion adjustment device
- Stroke auto position scale of die cushion
- Stroke auto position scale of slide
- Die cushion-locking device
- Die cushion quick exhaust device
- Miss feed detector
- Quick dies change device
- Stepless speed change controller device
- Uncoiller, leveler, roll feeder, air feeder, able to manufacture
- Transfer device, able to manufacture
- Moving bolster
- Moving truck
- HI-set
- Total lubrication, line
- SMB just in time
- Moving bolster (option):
- Moving bolster lifting
- Moving bolster clamping
- Moving bolster (T-cross: option)
- Hydraulic system
- Pin lifter
- Auto reel cable
Main Products
( mechanical ) press machine