ST-BDS46
The 4" x 6" belt and disc sander differs from a conventional sander in structure and function. Unlike the conventional 460 model which work piece width is affected by the disc, this new model increases width capacity without restriction. The platen allows for quick belt change by simply loosen the adjustment lever for convenient operation. The platen can be operated vertically. Safety guards are provided at the front and rear ends of the machine. Equipped with chip chute for connection to a dust collector. This machine has been patented in several countries.
The ST-BDS610E has improved design on structure and function comparing to a conventional sander. An innvative design on the platen allowing for quick belt change by simply loosening the adjustment lever. This not only provides convenient operation, but also flexible function on the machine. Remove the yellow guard, then you can fit air drum, sponge drum, or sanding paper strip wheel on the arbor. The platen can be operated vertically. Safety guards are provided at the front and rear ends of the machine. Equipped with chip chute for connection to a dust collector. Clutch on the machine enables disc running only while keeping belt fixed for added safety.