Specifications
- HB 42-3M
- Bar diameter: 5 - 42 mm.
- Max. bar length: 3,100 mm.
- L x W: 4,250 x 480 mm.
- HB 42-2.5M
- Bar diameter: 5 - 42 mm.
- Max. bar length: 2,600 mm.
- L x W: 3,650 x 480 mm.
Features
- Hydraulic oil pressure to the piston / pusher assembly feeds the barstock into the lathe spindle.
- The patented valve in the piston allows a controlled volume of oil to create an evenly distributed oil film between the guide tube and barstock. This allows the bar to urn without vibration nor noise.
- Rotation of the bar creates the hydrodynamic effect whereby the bar is supported and cushioned by the oil film.
- If the spindle speed is zero, the hydrodynamic support is zero and the bar rests on the feed tube.
- The revolving bar produces increased oil pressure and the bar is lifted from the bottom of the feed tube.
- With increasing speed, the hydrodynamic force increases and the bar revolves centrally.
- Oil entering the guide tube through the piston is the only way of achieving full hydrodynamic support throughout the length of the barfeed.
Main Products
CNC Lathe, CNC Auto Lathe, Precision Auto Lathe, Bar Feeder For Lathe, Turning Lathe