Features

• One Touch On-Off Switch
• One touch start up and preset by computer remote shutdown and restart.
• Full Featured Indication
• You can easily see UPS any condition by the LED bar display on the front panel.
• Silence Reset
• Press once to stop alarm at back-up mode, during battery low alarm recover beeping sound.
• Wider Input Range Available
• Input voltage +/- 25%, output +/- 2%
• DC Start
• When Main power failure, UPS can be turned on by DC start.
• Auto detect
• Auto detect UPS operation, when UPS be turned on.
• Battery Fault Detection
• LED battery flash when UPS be turned on, if battery fault, UPS auto shutdown.
• Charging Circuit Protection
• Avoid battery over recharge and over discharge.
• Thermal Switch Detect Heating
• When overload or battery discharge, UPS can easily dissipate heat by use of a variable speed fan.
• Lightening and Surge Protection
• Complete Isolation Design
• Fully complete isolated the input and output.
• No leakage current when UPS shutdown.
• Long Back-Up Time Series
• Plug-in external battery packs for runtimes to 8 hours or longer.
• Operation from emergency Generator power source.
• Intelligent Power Interface
• Available for most operating systems Novell, SCO UNIX, IBM AS/400...etc. via a DB-9 pin connector.
• Special Feature:
• 1-select transfer to stop output or bypass. Overload or inverter fail when main power in bad condition.
• 2-select Auto start up or by switch start, when main power input.
• 3-select transfer to main power input or backup mode when G. in bad condition or N. &. L. be reversed.