Multi-Parameter Patient Monitor
PM-9000A+ Multi-parameter patient Monitor
PM-9000AI Multi-parameter Monitor
ECG measurement;
Leads choices: All, I, II, III, aVF, aVR, aVL. V1--6 chest leads showed
Gains options: × 1, × 2, × 4, and × 0.5 four trenches
Frequency: 0.5 Hz - 100 Hz
Common-mode signal inhibition: More than 70 dB
Scan rate: 12.5 mm / S, 25 mm / S, 50 mm / S standard three stalls.
HR: ± 5 bpm
Precision calibration signal: 1mv(peak, ± 3% accuracy)
ST Detection: measurement range (-1.0mV----+1.0mV)
Using Standard: meet the ANSI / AMI EC13 -1992 standard
Response time: 1s
Alarm: Sound and Light
Preset heart rate range: (Alarm over preset numerical)
Ceiling: 1-255 bpm adjustable
Threshold: 0-254 bpm adjustable
RESP Breath
Breathing frequency range: 0-60 bum
Accuracy: ± 1brpm
Response time: 1s
Gains options: × 1, × 2, × 4, and × 0.5 four trenches
Alarm: Sound and Light
Alarm range: (numerical preset alarm over)
Ceiling: 10-100 bpm adjustable
Threshold: 0 -99 bpm adjustable
NIBP measurement
Technology: Oscillometric
Mode: manual / automatic
Measurement units: mmHg / kpa
Protection: Double security protection
A measurement time: less than 45 S
Scope: Pressure Cuffs 0-250 mmHg
Product introduction:
XB-1102 Anaesthesia Syringe Pump is a kind of intellectualized automatic infusion devices, which is designed for delivery of anesthetic drugs by target-controlled infusion mode according to the pharmacokinetics and the experience in clinical use. It makes use of the integration of the technology of micro-processor control and precise manufacture. It is available for performing an intravenous analgesia infusion. It is Applicable to all the inpatient surgical anesthesia and endoscopic examination, sedation of ICU patients etc. It is characterized by accurate infusing, sufficient function and simple operation.
Functions and Features:
(1) Operation modes: Plasma target controlled infusion mode, Effect site target controlled infusion mode and Flow rate controlled infusion mode.
A) Plasma target controlled Infusion mode enables the users to set the target plasma concentration, Effect site target Controlled Infusion mode enables the users to set the target effect site concentration. The pump delivers drugs to maintain the desired concentration according to the pharmacokinetic model. The Infusion rates are altered automatically.
B) Flow Rate Controlled Infusion mode: It enables the users to control the infusion by setting the flow rate. There are seven flow rate units of available such as ml/h, mg/h, ug/h, mg/kg/h, mg/kg/min, ug/kg/h, ug/kg/min.
(2) Available drugs: Fentanyl, Alfentanil, Sufentanil, Midazolam, Propofol, Etomidate, Vecuronium, Atracurium, Rocuronium, Remifentanil, Ketamine.
(3) Automatic compensation for drug when the infusion is paused and maintain the Plasma or Effect site concentration required.
Advanced intelligence, recovery time forecast function, which helps the doctors to stop the infusion at the right time.
(4) RS-232 communication: It enables the history data to be transmitted from pump to PC.
(5) Alarm and Warns: When something abnormal occurs, the pump can give out alarming and warning information such as AC power failure, battery low, near empty of the syringe, empty of the syringe /occlusion, end of infusion, Syringe disengaged etc.
(6) Syringe available: All kinds of syringe whose standard capacity is in the standard capacity set 10ml, 20ml, 50(60)ml can be used in the pump by custom syringe's setting. And the infusion accuracy can be guaranteed.
SPECIFICATIONS:
Range of Flow rate:
10ml syringe: 0.1~300ml/h;
20ml syringe: 0.1~600ml/h;
50(60)ml syringe: 0.1~1200ml/h;
Suitable Syringe: All the syringe in the standard capacity set 10ml, 20ml, 50(60)ml can be used in the pump by custom syringe's setting.
Accuracy: +/-3% (on condition that the total infusion capacity is more than 5.0ml and the infusion rate is more than 2.0ml/h and the syringe extension set have been purged)
Display: A Large Screen(240*180pixel), rotary setting with convenient operation interface.
Non-volatile memory: The pump memories all the setup parameters and history data of the last infusion.
Operating conditions: >
Ambient temperature: +5~+40C
Relative humidity (RH): 30 %~75 %
Power supply:
AC: 100V~245V\50 +/-1Hz
Battery: 14.4V battery can use for more than three hours after charged for 10 hours.
Atmospheric pressure: 860~1060hPa
Dimension (mm): 336(L)*153(W)*132(H)
Weight: 2.5kg
Safety Classification: Class II and Type CF
PM-9000AI Multi-parameter Monitor
ECG measurement;
Leads choices: All, I, II, III, aVF, aVR, aVL. V1--6 chest leads showed
Gains options: × 1, × 2, × 4, and × 0.5 four trenches
Frequency: 0.5 Hz - 100 Hz
Common-mode signal inhibition: More than 70 dB
Scan rate: 12.5 mm / S, 25 mm / S, 50 mm / S standard three stalls.
HR: ± 5 bpm
Precision calibration signal: 1mv(peak, ± 3% accuracy)
ST Detection: measurement range (-1.0mV----+1.0mV)
Using Standard: meet the ANSI / AMI EC13 -1992 standard
Response time: 1s
Alarm: Sound and Light
Preset heart rate range: (Alarm over preset numerical)
Ceiling: 1-255 bpm adjustable
Threshold: 0-254 bpm adjustable
RESP Breath
Breathing frequency range: 0-60 bum
Accuracy: ± 1brpm
Response time: 1s
Gains options: × 1, × 2, × 4, and × 0.5 four trenches
Alarm: Sound and Light
Alarm range: (numerical preset alarm over)
Ceiling: 10-100 bpm adjustable
Threshold: 0 -99 bpm adjustable
NIBP measurement
Technology: Oscillometric
Mode: manual / automatic
Measurement units: mmHg / kpa
Protection: Double security protection
A measurement time: less than 45 S
Scope: Pressure Cuffs 0-250 mmHg
Product introduction:
XB-1102 Anaesthesia Syringe Pump is a kind of intellectualized automatic infusion devices, which is designed for delivery of anesthetic drugs by target-controlled infusion mode according to the pharmacokinetics and the experience in clinical use. It makes use of the integration of the technology of micro-processor control and precise manufacture. It is available for performing an intravenous analgesia infusion. It is Applicable to all the inpatient surgical anesthesia and endoscopic examination, sedation of ICU patients etc. It is characterized by accurate infusing, sufficient function and simple operation.
Functions and Features:
(1) Operation modes: Plasma target controlled infusion mode, Effect site target controlled infusion mode and Flow rate controlled infusion mode.
A) Plasma target controlled Infusion mode enables the users to set the target plasma concentration, Effect site target Controlled Infusion mode enables the users to set the target effect site concentration. The pump delivers drugs to maintain the desired concentration according to the pharmacokinetic model. The Infusion rates are altered automatically.
B) Flow Rate Controlled Infusion mode: It enables the users to control the infusion by setting the flow rate. There are seven flow rate units of available such as ml/h, mg/h, ug/h, mg/kg/h, mg/kg/min, ug/kg/h, ug/kg/min.
(2) Available drugs: Fentanyl, Alfentanil, Sufentanil, Midazolam, Propofol, Etomidate, Vecuronium, Atracurium, Rocuronium, Remifentanil, Ketamine.
(3) Automatic compensation for drug when the infusion is paused and maintain the Plasma or Effect site concentration required.
Advanced intelligence, recovery time forecast function, which helps the doctors to stop the infusion at the right time.
(4) RS-232 communication: It enables the history data to be transmitted from pump to PC.
(5) Alarm and Warns: When something abnormal occurs, the pump can give out alarming and warning information such as AC power failure, battery low, near empty of the syringe, empty of the syringe /occlusion, end of infusion, Syringe disengaged etc.
(6) Syringe available: All kinds of syringe whose standard capacity is in the standard capacity set 10ml, 20ml, 50(60)ml can be used in the pump by custom syringe's setting. And the infusion accuracy can be guaranteed.
SPECIFICATIONS:
Range of Flow rate:
10ml syringe: 0.1~300ml/h;
20ml syringe: 0.1~600ml/h;
50(60)ml syringe: 0.1~1200ml/h;
Suitable Syringe: All the syringe in the standard capacity set 10ml, 20ml, 50(60)ml can be used in the pump by custom syringe's setting.
Accuracy: +/-3% (on condition that the total infusion capacity is more than 5.0ml and the infusion rate is more than 2.0ml/h and the syringe extension set have been purged)
Display: A Large Screen(240*180pixel), rotary setting with convenient operation interface.
Non-volatile memory: The pump memories all the setup parameters and history data of the last infusion.
Operating conditions: >
Ambient temperature: +5~+40C
Relative humidity (RH): 30 %~75 %
Power supply:
AC: 100V~245V\50 +/-1Hz
Battery: 14.4V battery can use for more than three hours after charged for 10 hours.
Atmospheric pressure: 860~1060hPa
Dimension (mm): 336(L)*153(W)*132(H)
Weight: 2.5kg
Safety Classification: Class II and Type CF
Specifications
- PM-9000A+ Multi-parameter Monitot
- PM-9000A+ Multi-parameter patient Monitor
- PM-9000AI Multi-parameter Monitor
- ECG measurement;
- Leads choices: All, I, II, III, aVF, aVR, aVL. V1--6 chest leads showed
- Gains options: × 1, × 2, × 4, and × 0.5 four trenches
- Frequency: 0.5 Hz - 100 Hz
- Common-mode signal inhibition: More than 70 dB
- Scan rate: 12.5 mm / S, 25 mm / S, 50 mm / S standard three stalls.
- HR: ± 5 bpm
- Precision calibration signal: 1mv(peak, ± 3% accuracy)
- ST Detection: measurement range (-1.0mV----+1.0mV)
- Using Standard: meet the ANSI / AMI EC13 -1992 standard
- Response time: 1s
- Alarm: Sound and Light
- Preset heart rate range: (Alarm over preset numerical)
- Ceiling: 1-255 bpm adjustable
- Threshold: 0-254 bpm adjustable
- RESP Breath
- Breathing frequency range: 0-60 bum
- Accuracy: ± 1brpm
- Response time: 1s
- Gains options: × 1, × 2, × 4, and × 0.5 four trenches
- Alarm: Sound and Light
- Alarm range: (numerical preset alarm over)
- Ceiling: 10-100 bpm adjustable
- Threshold: 0 -99 bpm adjustable
- NIBP measurement
- Technology: Oscillometric
- Mode: manual / automatic
- Measurement units: mmHg / kpa
- Protection: Double security protection
- A measurement time: less than 45 S
- Scope: Pressure Cuffs 0-250 mmHg
- XB-1008 multi-parameters monitor
- XB-1008 multi-parameters monitor is specially designed for the monitoring application in the ICU/CCU and NICU for adult, pediatric and neonatal patient to achieve maximum flexibility and optimum performance. The intelligent monitoring, alarming, TCP/IP networking and many other features will provide easy, integrated monitoring in any application.
- High-performance monitoring for flexible care settings:
- 1, 12.1' color TFT LCD screen supports display max. 8 waveforms
- 2, Personated voice reminding alarm; Visual On-display and integrated alarm light
- 3. Real time S-T segment analysis, pace detection and arrhythmia analysis
- 4. Drug calculation and titration table
- 5. Extended advance function: IBP, BIS, EtCO2, Multi-Gas/ O2
- 6. Suitable for monitoring adult, pediatric and neonatal patient.
- 7. Display mode: Standard, Large Font, NIBP Trend, Trend Table, Full lead ECG, Oxy CRG.
- 8. 720 hours of graphic and tabular trends of all parameters
- Standard Configuration:
- Anti-glare screen, Lithium battery, 5-Lead ECG, Respiration, NIBP, SpO2, Pulse Rate, Temperature
- Optional Configuration:
- 2IBP, Depth of Anesthesia Monitoring Module (BIS), EtCO2 (Side stream CO2), Multi-Gas/ O2
- VGA, Thermal printer (50 mm)
- Pediatric / neonatal accessories: reusable NIBP cuff & SpO2 probe; disposable NIBP cuff & SpO2 probe
- XB-1006 Multi-parameter Monitor
- XB-1006 Multi-parameter Monitor
- Description;
- XB-1006 Multi-parameter Monitor is specially designed for the monitoring application in the ICU/CCU and NICU for adult, pediatric and neonatal patient to achieve maximum flexibility and optimum performance. Its intelligent monitoring, alarming, TCP/IP networking and many other features will provide easy, integrated monitoring in any application.
- High-performance monitoring for flexible care settings;
- --12.1' color TFT LCD screen, support external VGA (Optional)
- --Standard Monitoring parameters: ECG, SPO2, NIBP, RESP, TEMP, PR
- --Real time ST segment analysis, pace maker detection and Arrhythmia analysis
- -- Drug calculation and titration table
- --Supporting storage of 72 hours patient data, 1000 NIBP records and 100 alarm event.
- --Suitable for monitoring adult, pediatric and neonatal patient
- --High-speed built-in thermal recorder (option)
- Standard Configuration:
- --TFT LCD screen, Lead-acid battery, 5-Lead ECG, Respiration, NIBP, SpO2, Pulse Rate, Temperature
- --- 720 hours patient data storage + personated voice reminding alarm
- Optional Configuration:
- --2IBP, Depth of Anesthesia Monitoring Module (BIS), EtCO2 (Side stream CO2), Multi-Gas/ O2
- --VGA, Thermal printer (50 mm)
- --Pediatric / neonatal accessories: reusable NIBP cuff & SpO2 probe; disposable NIBP cuff & SpO2 probe
- XB-1015 Multi-parameter Monitor
- XB-1015 Multi-parameter Monitor
- Description;
- XB-1015 multi-parameters monitor is designed to match the pace and unique needs of adult, pediatric, and neonatal intensive care; anesthesia and peri-operative care. Its intelligent monitoring, alarming, TCP/IP networking and many other features will provide easy, integrated monitoring in any application.
- High-performance monitoring for flexible care settings:
- --15' color TFT LCD screen supports display max. 8 waveforms
- --Personated voice reminding alarm; Visual On-display and integrated alarm light
- --Display mode: Standard, Large Font, NIBP Trend, Trend Table, Full lead ECG, Oxy CRG.
- -- Drug calculation and titration table
- --Real time ST segment analysis, pace maker detection and Arrhythmia analysis,
- --Extended advance function: IBP, BIS, EtCO2, Multi-gas/O2
- --Suitable for monitoring adult, pediatric and neonatal patient.
- --Supporting storage of 720 hours patient data, 10000 NIBP records and 1000 alarm event.
- --External lithium battery
- Standard Configuration:
- --Anti-glare big screen, Lithium battery, 5-Lead ECG, Respiration, NIBP, SpO2, Pulse Rate, Temperature
- Optional Configuration:
- -- 2IBP, Depth of Anesthesia Monitoring Module (BIS), EtCO2 (Side stream CO2), Multi-Gas/ O2
- --VGA, Thermal printer (50 mm)
- --Pediatric / neonatal accessories: reusable NIBP cuff & SpO2 probe; disposable NIBP cuff & SpO2 probe
- XB-601B Multi-Parameter Monitor
- XB-601B Multi-Parameter Patient Monitor
- Features:
- (1) 12.1 '' TFT true color high definition LCD
- (2) Real-time display the waveform of ECG, SPO2,and Respiration. At the same time, on the screen digital display the data of Pulse Rate, Temperature, Respiration, ECG，SPO2, BP .
- (3) Interface color of the waveform can be setup according to the requirement.
- (4) Automatically analyzing 20 kinds of arrhythmia waveform.
- (5) Can store 256 hours data trends, convenient for doctor to diagnose.
- (7) Three levels sound and light alarm, digital volume adjustment
- (8) Three conversion modes: Monitor operation and diagnosis.
- (9) Anti-defibrillation and anti- electrosurgical unit, and can be used simultaneously with the pacemaker.
- (10) In-car electricity supply systems, AC-DC adapter. Work time of the battery is more than 120 minutes.
- (11) With ST-segment measurement function
- (12) EtCO2 and double IBP are optional
- (13) Can store 5 minutes ECG waveform and their data
- (14) Offering the standard interface and the big character display function
Main Products
infusion pump, anesthesia pump, ECG, feeding pump, vet infusion pump,