Welcome to inquire , 004@hy-industry.com or caroline-xia2011@hotmail.com
Purpose :
SYD-261 Flash Point Tester can determine closed cup flash point of petroleum products having a flash point higher than 40 centigrade.
Technical parameter :
1. Power supply: AC 220V±10%, 50 Hz;
2. Heating device:
(1) The furnace is made of SiC materials; its power is 600 W;
(2) Heating power is adjustable in the range of 0~600W;
3. Sample temperature rising rate: 1~12°C per minute, manually controlled;
4. Electric stirring device:
(1) Stirring motor: 45TYZ Motor;
(2) Driving device: by a soft shaft;
(3) Stirring blade specification: 8×40 mm;
5. Stirring speed: As per the requirement of GB/T261-2008;
(1) 90~120 RPM for procedure A;
(2) 250±10 RPM for procedure B;
6. Standard oil cup: As per the requirement of GB/T261-2008;
(1) Inner diameter: 50.7~50.8 mm;
(2) Depth: 55.7~56.0 mm;
(3) Depth of Marked line on the oil cup: 33.9~34.3 mm;
(4) Oil sample cubage: about 70 ml;
7. Ignition device (Flame application device):
(1) Ignition source: Coal gas (or other civilian combustible gas);
(2) Aperture of ignition device: 0.8 mm;
8. Thermometer: Rod type Mercury Thermometer, as per GB/T261-2008;
(1) Temperature range: -5~110°C, Each scale division is 0.5 °C;
(2) Temperature range: 20~150°C, Each scale division is 1.0 °C;
(3) Temperature range: 90~370°C, Each scale division is 2 °C;
9. Ambient temperature: ≤35°C;
10. Relative humidity: ≤85%;
11. Total power consumption: not more than 650 WLanguage Option Switch languge to help reading: French German Italian Russian Spanish Portuguese Korean
FrenchGermanItalianRussianSpanishPortugueseKorean SYD-261 PMCC Flash Point Tester
Purpose :
SYD-261 Flash Point Tester can determine closed cup flash point of petroleum products having a flash point higher than 40 centigrade.
Technical parameter :
1. Power supply: AC 220V±10%, 50 Hz;
2. Heating device:
(1) The furnace is made of SiC materials; its power is 600 W;
(2) Heating power is adjustable in the range of 0~600W;
3. Sample temperature rising rate: 1~12°C per minute, manually controlled;
4. Electric stirring device:
(1) Stirring motor: 45TYZ Motor;
(2) Driving device: by a soft shaft;
(3) Stirring blade specification: 8×40 mm;
5. Stirring speed: As per the requirement of GB/T261-2008;
(1) 90~120 RPM for procedure A;
(2) 250±10 RPM for procedure B;
6. Standard oil cup: As per the requirement of GB/T261-2008;
(1) Inner diameter: 50.7~50.8 mm;
(2) Depth: 55.7~56.0 mm;
(3) Depth of Marked line on the oil cup: 33.9~34.3 mm;
(4) Oil sample cubage: about 70 ml;
7. Ignition device (Flame application device):
(1) Ignition source: Coal gas (or other civilian combustible gas);
(2) Aperture of ignition device: 0.8 mm;
8. Thermometer: Rod type Mercury Thermometer, as per GB/T261-2008;
(1) Temperature range: -5~110°C, Each scale division is 0.5 °C;
(2) Temperature range: 20~150°C, Each scale division is 1.0 °C;
(3) Temperature range: 90~370°C, Each scale division is 2 °C;
9. Ambient temperature: ≤35°C;
10. Relative humidity: ≤85%;
11. Total power consumption: not more than 650 WLanguage Option Switch languge to help reading: French German Italian Russian Spanish Portuguese Korean
FrenchGermanItalianRussianSpanishPortugueseKorean SYD-261 PMCC Flash Point Tester
Main Products
petroleum purifier , oil tester