fire alarm control panels
General
Conventional Fire Alarm Control Panel with four Zones
Key Specifications/Special Features
General:
The HP101U Series Conventional Fire Alarm Control Panel is a 24 volt, four to sixteen-zone, Class B, Conventional Fire Alarm Control Panel. Designed exclusively to meet the latest market requirements and future ULC codes, the highly cost-effective IDC1000 Series can be used in a variety of low- to medium-sized applications.
Specifications:
•AC POWER : 90 to 270 VAC, 50 Hz, 3.0 amps.
•Wire size: minimum 14 AWG (2.0 mm²) with 600-volt insulation.
•BATTERY: Sealed lead-acid batteries only. Maximum charging circuit: 27.6VDC @ 0.8 Amp
Features:
•Four Zone, Style B (Class B) Initiating Device Circuits (IDCs).
•All zones accept two-wire smoke detectors and any normally-open contact devices.
•Zones 1 - 4 configured as general alarm zones.
•All circuits are power-limited and supervised, meeting the latest ULC requirements using fuse-less technology.
•One built-in, Style Y (Class B) Notification Appliance (Signal) Circuits (NACs).
•NACs may be programmed: Silence-able. Non-Silence-able.
•Auto-Silence (5 to 20 Minutes).
•1.25 amps of NAC power & 3.0 amps of total system power.
Alarm, Trouble and Supervisory, Form-C relays standard. & 24-volt operation.
•Resettable four-wire smoke detector power @ 500 mA. Non-resettable power @ 500 mA.
•Integral battery charger capable of charging up to 18 AH batteries (batteries over 4 AH require use of the external battery back box, or ULC listed equivalent).
•One-man walk-test programmable for silent or audible test. Disable/Enable control per IDC.
•Reverse polarity protection.
•Control buttons: Mode - Test - ACK (Acknowledge) Alarm Silence - Reset
•LED indicators: AC Power (green & yellow LED)- Fire Alarm (red LED) - Trouble (yellow LED)
•Supervisory (yellow LED) - Signal Silence (yellow LED) - Battery Power (green & yellow LED)
•Zone Disable (yellow LED) - NAC Fault (yellow LED) - NAC Disable (yellow LED)
•Zone Alarm (one for each zone) (red LED) - Zone Trouble (one for each zone) (yellow LED)
•Earth Fault (on circuit board) - Battery Fault (on circuit board) - Charger Fault (on circuit board)
Conventional Fire Alarm Control Panel with four Zones
Key Specifications/Special Features
General:
The HP101U Series Conventional Fire Alarm Control Panel is a 24 volt, four to sixteen-zone, Class B, Conventional Fire Alarm Control Panel. Designed exclusively to meet the latest market requirements and future ULC codes, the highly cost-effective IDC1000 Series can be used in a variety of low- to medium-sized applications.
Specifications:
•AC POWER : 90 to 270 VAC, 50 Hz, 3.0 amps.
•Wire size: minimum 14 AWG (2.0 mm²) with 600-volt insulation.
•BATTERY: Sealed lead-acid batteries only. Maximum charging circuit: 27.6VDC @ 0.8 Amp
Features:
•Four Zone, Style B (Class B) Initiating Device Circuits (IDCs).
•All zones accept two-wire smoke detectors and any normally-open contact devices.
•Zones 1 - 4 configured as general alarm zones.
•All circuits are power-limited and supervised, meeting the latest ULC requirements using fuse-less technology.
•One built-in, Style Y (Class B) Notification Appliance (Signal) Circuits (NACs).
•NACs may be programmed: Silence-able. Non-Silence-able.
•Auto-Silence (5 to 20 Minutes).
•1.25 amps of NAC power & 3.0 amps of total system power.
Alarm, Trouble and Supervisory, Form-C relays standard. & 24-volt operation.
•Resettable four-wire smoke detector power @ 500 mA. Non-resettable power @ 500 mA.
•Integral battery charger capable of charging up to 18 AH batteries (batteries over 4 AH require use of the external battery back box, or ULC listed equivalent).
•One-man walk-test programmable for silent or audible test. Disable/Enable control per IDC.
•Reverse polarity protection.
•Control buttons: Mode - Test - ACK (Acknowledge) Alarm Silence - Reset
•LED indicators: AC Power (green & yellow LED)- Fire Alarm (red LED) - Trouble (yellow LED)
•Supervisory (yellow LED) - Signal Silence (yellow LED) - Battery Power (green & yellow LED)
•Zone Disable (yellow LED) - NAC Fault (yellow LED) - NAC Disable (yellow LED)
•Zone Alarm (one for each zone) (red LED) - Zone Trouble (one for each zone) (yellow LED)
•Earth Fault (on circuit board) - Battery Fault (on circuit board) - Charger Fault (on circuit board)
Main Products
fire alarms, smoke alarms and detectors, gas alarms and detectors