FULL SET
TURKOM-CERA
Revolution in Dental Technology
Revolutionary solution in all areas of prosthetic dentistry!
A Great Material and an Extremely Simple Method for your lab and practice
With the experience of over 30 years, and after thousands of tests the Research and Development team of Turkom-Cera have developed and created a brand new, revolutionary material and technological process in order to offer a proper solution to all those problems which the professionals of prosthetic dentistry have been facing over and over again.
The result of this development is a revolutionary material and technology in the area of dental ceramics, called Turkom-Cera. Turkom-Cera actually is fused alumina for the preparation of metal free bridges and crowns.
10 Times Faster
Complete crown in 90 minutes
In case you use any of the known processes such as CAD/CAM or PFM it costs you an average of 16 hours to make a crown.
As opposed to this, with the materials and technology of Turkom-Cera all you need is 90 minutes to complete your work. The extensive work process is cut to its TENTH!
Make a calculation and see what this means to you. In case you have enough orders, you are able to accomplish 10 times more work during the same time period and you can make 10 times more money as well or... if you wish to lead a more comfortable life, you can drastically reduce your work hours without having to suffer any financial loss.
Extremely Strong
Only Diamonds are Stronger
The flexible strength of the Turkom-Cera layer is a certified 535-650 Mpa which makes the Turkom-Cera frame much stronger than frames made of any other material available in the market. This outstanding performance is due to the fact that the material is made of 99.98% Aluminum Oxide.
More than 50% Lighter
In case of 14 crowns the weight of the unit is only 2.5 grams
The layer of a crown made with Turkom-Cera materials and technology is approximately 0.3-0.5 millimeters thick. This means a 2 grams decrease by unit, therefore it is twice as light as any other, traditionally prepared crown.
Incredibly Simple Technology
You don't need anything but a furnace
When using the materials of the Turkom-Cera kit you do not need to apply any other traditional methods which are required in case of the CAD/CAM, PFM and other processes. All you need is a traditional, 1200Celsius furnace and a Turkom-Cera kit!
By using Turkom-Cera materials and its revolutionary technology, the preparation of a crown or bridge becomes astonishingly simple and does not require any traditional technologies.
Extremely Cost-Effective
Cheap technology, short learning process
Please do compare the Turkom-Cera technology with the cost of an average technology used in a dental laboratory. Not to mention the time consuming learning process of traditional methods! All these mean a loss of time and money. It only takes 3 materials to make 500 metal-free units with the Turkom-Cera kit.
You can make approx. 500 units out of 1 kit.
You can make approx. 250 units out of 1 small kit.
The question is very simple
Will your practice be among the firsts or the lasts in taking advantage of this revolutionary opportunity?
Will you spearhead or just tag along the change the application of this new technology and material create?
The first means an astonishing business and professional advantage, the latter a painful battle for mere existence.
It only depends on you to decide which group you belong to.
Revolution in Dental Technology
Revolutionary solution in all areas of prosthetic dentistry!
A Great Material and an Extremely Simple Method for your lab and practice
With the experience of over 30 years, and after thousands of tests the Research and Development team of Turkom-Cera have developed and created a brand new, revolutionary material and technological process in order to offer a proper solution to all those problems which the professionals of prosthetic dentistry have been facing over and over again.
The result of this development is a revolutionary material and technology in the area of dental ceramics, called Turkom-Cera. Turkom-Cera actually is fused alumina for the preparation of metal free bridges and crowns.
10 Times Faster
Complete crown in 90 minutes
In case you use any of the known processes such as CAD/CAM or PFM it costs you an average of 16 hours to make a crown.
As opposed to this, with the materials and technology of Turkom-Cera all you need is 90 minutes to complete your work. The extensive work process is cut to its TENTH!
Make a calculation and see what this means to you. In case you have enough orders, you are able to accomplish 10 times more work during the same time period and you can make 10 times more money as well or... if you wish to lead a more comfortable life, you can drastically reduce your work hours without having to suffer any financial loss.
Extremely Strong
Only Diamonds are Stronger
The flexible strength of the Turkom-Cera layer is a certified 535-650 Mpa which makes the Turkom-Cera frame much stronger than frames made of any other material available in the market. This outstanding performance is due to the fact that the material is made of 99.98% Aluminum Oxide.
More than 50% Lighter
In case of 14 crowns the weight of the unit is only 2.5 grams
The layer of a crown made with Turkom-Cera materials and technology is approximately 0.3-0.5 millimeters thick. This means a 2 grams decrease by unit, therefore it is twice as light as any other, traditionally prepared crown.
Incredibly Simple Technology
You don't need anything but a furnace
When using the materials of the Turkom-Cera kit you do not need to apply any other traditional methods which are required in case of the CAD/CAM, PFM and other processes. All you need is a traditional, 1200Celsius furnace and a Turkom-Cera kit!
By using Turkom-Cera materials and its revolutionary technology, the preparation of a crown or bridge becomes astonishingly simple and does not require any traditional technologies.
Extremely Cost-Effective
Cheap technology, short learning process
Please do compare the Turkom-Cera technology with the cost of an average technology used in a dental laboratory. Not to mention the time consuming learning process of traditional methods! All these mean a loss of time and money. It only takes 3 materials to make 500 metal-free units with the Turkom-Cera kit.
You can make approx. 500 units out of 1 kit.
You can make approx. 250 units out of 1 small kit.
The question is very simple
Will your practice be among the firsts or the lasts in taking advantage of this revolutionary opportunity?
Will you spearhead or just tag along the change the application of this new technology and material create?
The first means an astonishing business and professional advantage, the latter a painful battle for mere existence.
It only depends on you to decide which group you belong to.
Certificate
- CE
- ISO9001
Main Products
Dental Equipment, Dental Material