The DVS2811 is full digital 2 phase stepper driver based on DSP control. The drive voltage of which is from 40V to 110VAC. It is designed for use with the 2 phase hybrid stepper motor of all kinds with 57mm to 110mm outside diameter, regulated phase current from 0.5A to 8.0A. The circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly without noise and vibration. The highest micro step is 40000ppr. It is widely used in small size numerical control devices such as curving machine, packing machine, CNC and etc.
FEATURES
* 16 channels constant angle, constant torque micro steps, highest micro step: 40000ppr
* Highest response frequency: 200Kpps
* Current of winding will be reduced by approximately 50% when no step pulse command is received for 1.5 second
* Opto-isolated signal I/O
* Drive current is adjustable in 16 channels from 0.5A/phase to 8.0A/phase
* Single power supply from 40V to 110VAC
* Phase terminal memory function (motor phase terminal is memorized after input pulse train stopping 3s and it is recovered when stepper driver power on or signal MF changes from low level to high level)
FEATURES
* 16 channels constant angle, constant torque micro steps, highest micro step: 40000ppr
* Highest response frequency: 200Kpps
* Current of winding will be reduced by approximately 50% when no step pulse command is received for 1.5 second
* Opto-isolated signal I/O
* Drive current is adjustable in 16 channels from 0.5A/phase to 8.0A/phase
* Single power supply from 40V to 110VAC
* Phase terminal memory function (motor phase terminal is memorized after input pulse train stopping 3s and it is recovered when stepper driver power on or signal MF changes from low level to high level)
Main Products
stepper driver, stepping driver, step motor drive, stepper motor