Specification LUNAN-1640 LUNAN-1640B
LUNAN-1660 LUNAN-1660B
Max. swing over bed 400 mm 400mm
Max. swing over cross slide 210mm 210mm
Max. swing over gap 590mm 590mm
Distance between centers 1000/1500mm 1000/1500mm
Width of bed 300mm 300mm
Spindle nose D6 & D1-6(camlock) D8 & D1-8(camlock)
Spindle bore 58mm 80mm
Spindle speeds(12steps) 50-200rpm 40-1600rpm
Metric threads 0.5-7mm(21kinds) 0.5-7mm(21kinds)
Inch threads 4-56T.P.I.(32kinds) 4-56T.P.I.(32kinds)
Module threads 0.5-7mm(21kinds) 0.5-7mm(21kinds)
Diametral pitch threads 4-56D.P.(33kinds) 4-56D.P.(33kinds)
Longitudinal feeds range 0.059-0.83mm(0.002-0.033in)
Cross feeds range 0.019-0.27mm(0.001-0.011in)
Main motor power 5.5kw
N.W/G.W 1800/2000 2000/22000 2000/2200 2200/2400
LUNAN-1660 LUNAN-1660B
Max. swing over bed 400 mm 400mm
Max. swing over cross slide 210mm 210mm
Max. swing over gap 590mm 590mm
Distance between centers 1000/1500mm 1000/1500mm
Width of bed 300mm 300mm
Spindle nose D6 & D1-6(camlock) D8 & D1-8(camlock)
Spindle bore 58mm 80mm
Spindle speeds(12steps) 50-200rpm 40-1600rpm
Metric threads 0.5-7mm(21kinds) 0.5-7mm(21kinds)
Inch threads 4-56T.P.I.(32kinds) 4-56T.P.I.(32kinds)
Module threads 0.5-7mm(21kinds) 0.5-7mm(21kinds)
Diametral pitch threads 4-56D.P.(33kinds) 4-56D.P.(33kinds)
Longitudinal feeds range 0.059-0.83mm(0.002-0.033in)
Cross feeds range 0.019-0.27mm(0.001-0.011in)
Main motor power 5.5kw
N.W/G.W 1800/2000 2000/22000 2000/2200 2200/2400
Features
- Gap bed lathe
- Features:
- *Adjustable slip clutch eliminates tooth breakage caused by overload conditions.
- *Foot brakes for instant headstock stopping and shut off.
- *Bed is made of high tensile cast iron by resin-sand foundary.
- * Bedways , gears and shafts are hardened ground.
- *Apron, leadscrew, feed rod and starting lever are equipped with safety dvices.
- *Universal gear box without change gear for inch/metric threading.
- *Spindle jog button, easy for change speeds.
- *T-slots on cross slide for special machining.
- *Protection systems to meet CE Standards.
- *Metric/Inch dial are large and easily read on cross slide and compound.
- *Headstocks runs in oil-bath.
- *New: with camlock mount.
- *Feed drive gears and apron run in oil-bath.
Certificate
- CE
Main Products
lathe, cnc lathe, cnc milling machine, machining center,drill&mill