NC series is the latest generation of Moving Bridge style high accuracy high speed Coordinate Measuring Machine from Leader.NC serials combines single-point probing and analog scanning in a single high performance measuring machine also can equipped with contact and non-contact probe system. Based on the new generation of controller combines and optimizes temperature and accuracy compensation systems and advanced algorithms to support high-speed, high-accuracy analog open and closed loop scanning.
Granite fixed worktable, all three axes are made of high performance granite, good temperature characteristic, have the same coefficient of thermal expansion.
- Granite worktable with integral "dovetail" guide in X axis, eliminate the pitch and yaw ,also provides superior motion stability.
- Z axis air-balance with self-protection ,improve motion capability.
- Advanced synchronous belt drive system with non-slip and high stiffness, ensures high stabilit, lower noise.
- High precise, rigid, and pre-loaded air bearings on all axes, can ensure the guidance never be damped
- Transmission system uses high-power DC servo motor and new double level tape reducer to ensure rapid and accurate axes movement..
- RENISHAW steel scale
- Famous parts from all over the world are used in every important sub systems
NC 654Performance Specifications
Measuring Strokes : 600(mm) x 500(mm) x 400(mm)
Overall Dimension : 1630(mm) x 1280(mm) x 2380 (mm)
Max part weight : 500 kg
Resolution : 0.1 (mm)
Accuracy according GB/T16857.2-1997 equal ISO 10 360：
(Volumetric length measuring error) E =2.5 +3.5L/1000 [mm](Volumetric Probing Error) R = 2.4 mm
Environment Specifications
Room required specifications
Average room temperature: 18 - 22 蚓
Maximum thermal gradients:1 蚓/小时，2 蚓/天，1 蚓/米，
Air supply system
(Min. air pressure) : 0.7 MPa
Electrical requirements
- 电压 (Voltage) : 220 Vac 10%
(Frequency) : 50 Hz
(Current) : 10 A
Allowed Maximum Floor Vibration (Frequency Range): 0 ~ 19 Hz 19~75 Hz > 75 Hz