biodiesel processors

Product ID: KOBI models

Send Inquiry

You can produce your own biodiesel by using our biodiesel processors.

This unit is composed of two parts within itself. At the buttom part, there is a mixing tank. In this tank, vegetable oil and metoxit are mixed 1.5 hours at 60°C. At the upper part, necessary water is being warehoused to wash biodiesel that is formed. By the way, the temperature of the water increases to 50°C until biodiesel is formed. As you know, hot water dissolves waxes in biodiesel better than the others. And this increases the quality of biodiesel. Washing pump is run when the washing procedure is started. Sprey is run with pump pressure and better quality surface contact of biodiesel and water is performed. Then this hot water gains an insight into all biodiesel. As you know, washing procedure is one of the most important criteria for biodiesel. If biodiesel is not washed well, it may easily damage your car because of the waxes in biodiesel.

1-Mixing reactor tank
2-Washing unit
3-Resting tank
In the first stage; it is made with the same method as in KOBI-M. Biodiesel is sent to washing tank,which is second stage, after biodiesel is departed from glycerin. The process may be repeated by filling the first tank with raw material.
In the second stage; biodiesel, that is loaded into the washing tank, and hot water, that comes from the first tank, are washed by the pressurized sprey. You may repeat this process more than one. Then dirty water, which is subsided, is decomposed from the biodiesel and after this process it is sent to the third stage which is resting tank. It is adviced you to work with stock because the good has to wait 3 days in resting tank. At the end of third day, you can use your biodiesel with sure touch. When you want to fill your vehicle up with biodiesel, firstly run diesel pump. Then biodiesel passes through diesel fitler (50 micron) and then it reaches to the diesel gun after passing through diesel counter. In this way, you can fill up your vehicle with biodiesel by reading the meter according to your need.

Working principle is same as the system in KOBI-A. In this system, autocontrol is applied during the stage.

After reactoin process finishes, machine stops automatically. When the glycerin sedimentation process finishes, you are warned by alarm. Then you disburden glycerin and send biodiesel to the washing tank. In here, valves are automatically being opened and being closed. Machine washes the product automatically and waits dirty water to subside. When dirty water subsides completely, you are warned by an alarm. After dirty water is disburdened, biodiesel is sent to the resting tank. By the way, valves are automatically being opened and closed during all these processes. When you want to fill biodiesel to your vehicle, you first push the diesel pump button and then you may fill up your car with biodiesel according to your need.
System informations:
-Semiautomatic
-Gradual Process
-Automatically controlled valves
-Automatic washing
-Warning lamp
-High quality product
-Comfort in production

1-KYP 45 Cold Oil Press
2-KOBI HDPE 75
Capacity: Makes approx. 100 Liter of Biodiesel per day
Product Data:
Daily 100 lt capacity biodiesel reactor+cold oil press.
This reactor and cold oil press are integrated.
So that farmers will be able to both take oil out from their own crops and produce oil-cake for their animals and also produce their fuel that is necessary for their tractors.
This model which we developed for farmers works with 110-220 volt home circulation.
Aim: this model is developed for farmers. They will get oil from their crops thus they will produce their owm biodiesel by this way.
Thereby, the farmer will be able to produce his/her own diodiesel by getting out his own crop's oil about the cost of 30-40 cents. Also the oil-cake which is taken out can be used as animal feed.
The advantages of integrated system :
1-Less energy consumption
2-Less glycerin will come out in the production of biodiesel (nearly %5-%7)
3-To be able to consume for nutrition
4-High quality of oil-cake

Processor is designed around a sealed HDPE cone bottom tank on a heavy steel frame

1-KYP 45 Cold Oil Press
2-KOBI HDPE 75
Capacity: Makes approx. 100 Liter of Biodiesel per day
Product Data:
Daily 100 lt capacity biodiesel reactor+cold oil press.
This reactor and cold oil press are integrated.
So that farmers will be able to both take oil out from their own crops and produce oil-cake for their animals and also produce their fuel that is necessary for their tractors.
This model which we developed for farmers works with 110-220 volt home circulation.
Aim: this model is developed for farmers. They will get oil from their crops thus they will produce their owm biodiesel by this way.
Thereby, the farmer will be able to produce his/her own diodiesel by getting out his own crop's oil about the cost of 30-40 cents. Also the oil-cake which is taken out can be used as animal feed.
The advantages of integrated system :
1-Less energy consumption
2-Less glycerin will come out in the production of biodiesel (nearly %5-%7)
3-To be able to consume for nutrition
4-High quality of oil-cake

cold oil presses,biodiesel processors,olive-oil plant,filtration press