Technical parameters:
1. :0 --- 3000W output power of 3000W-20000W take optional order
2. Input Voltage :180 --- 265V AC or 85 --- 135V AC. 50/60Hz
3. Operating temperature: -20 --- +65
4. Output harmonic parameters: 97% (Min)
5. Start peak current (3000W load): less than or equal to 40A
6. Working frequency: 20K --- 250KHz (need to order more than 250K)
7. Remote control voltage :6 --- 15VDC, high voltage shut down, after the restoration of low-level soft-start.
8. MOS / IGBT maximum temperature: 50 degrees (3000W load, environmental temperature of 25 degrees when the test).
Tundra Shenzhen Power Technology Co., Ltd.
2. Function Description:
1. Power Adjustment: Potentiometer adjustment power, the power from zero to rated power adjustable.
2. Power Switch: ON for the Open, OFF for turn-off.
3. Display window: show power, ultrasonic frequency.
4. Power Supply and Protection of instructions: green indicator light that the power is turned on. The machine working properly. Lights out
Out that the power shut-off. If the indicator light flashes, it means that the load caused due to over-current, short circuit or power supply
Abnormal voltage, as well as the local machine with high temperature lead to the result of self-protection circuit.
5. The power cord: connect the machine with the city's connection device. Attention to a good grounding!
6. Output connection I: ultrasonic cleaning machine and the generator junction. Attention to positive and negative polarity can not take anti-.
7. Tuner: Ultrasonic Cleaning Machine junction with the generator, when the coaxial cable are applied for.
8. Sync terminal: ultrasonic generator port sync signal, if two or more than two generators with
The same load, the terminal will be able to make use of synchronous machines simultaneously an effective solution to the noise. And better cleaning effect.
When using the work of two synchronous generator, a synchronous generator internal switches (see attached diagram) assigned to the right
O position, at this time for the synchronization signal output; another switch synchronous generator assigned to the left I position, at this time
Synchronous signal input for connecting line of good synchronization, synchronization can be realized.
9. Remote control port: PLC CPU or other low-level signals raised in the port are free to control
Generator system to open or stop.
10. Cooling fan: the main power device cooling.
Contact: Sai Li
Tel: 86-0755-33073711
Mobile: 8613480723635
Fax: 86-0755-33932669
Email:shengfu5511@126.com
Address: Bao'an District, Shenzhen Huaxing Road, Longhua Big Wave 40
URL: www.sztemwa.com
1. :0 --- 3000W output power of 3000W-20000W take optional order
2. Input Voltage :180 --- 265V AC or 85 --- 135V AC. 50/60Hz
3. Operating temperature: -20 --- +65
4. Output harmonic parameters: 97% (Min)
5. Start peak current (3000W load): less than or equal to 40A
6. Working frequency: 20K --- 250KHz (need to order more than 250K)
7. Remote control voltage :6 --- 15VDC, high voltage shut down, after the restoration of low-level soft-start.
8. MOS / IGBT maximum temperature: 50 degrees (3000W load, environmental temperature of 25 degrees when the test).
Tundra Shenzhen Power Technology Co., Ltd.
2. Function Description:
1. Power Adjustment: Potentiometer adjustment power, the power from zero to rated power adjustable.
2. Power Switch: ON for the Open, OFF for turn-off.
3. Display window: show power, ultrasonic frequency.
4. Power Supply and Protection of instructions: green indicator light that the power is turned on. The machine working properly. Lights out
Out that the power shut-off. If the indicator light flashes, it means that the load caused due to over-current, short circuit or power supply
Abnormal voltage, as well as the local machine with high temperature lead to the result of self-protection circuit.
5. The power cord: connect the machine with the city's connection device. Attention to a good grounding!
6. Output connection I: ultrasonic cleaning machine and the generator junction. Attention to positive and negative polarity can not take anti-.
7. Tuner: Ultrasonic Cleaning Machine junction with the generator, when the coaxial cable are applied for.
8. Sync terminal: ultrasonic generator port sync signal, if two or more than two generators with
The same load, the terminal will be able to make use of synchronous machines simultaneously an effective solution to the noise. And better cleaning effect.
When using the work of two synchronous generator, a synchronous generator internal switches (see attached diagram) assigned to the right
O position, at this time for the synchronization signal output; another switch synchronous generator assigned to the left I position, at this time
Synchronous signal input for connecting line of good synchronization, synchronization can be realized.
9. Remote control port: PLC CPU or other low-level signals raised in the port are free to control
Generator system to open or stop.
10. Cooling fan: the main power device cooling.
Contact: Sai Li
Tel: 86-0755-33073711
Mobile: 8613480723635
Fax: 86-0755-33932669
Email:shengfu5511@126.com
Address: Bao'an District, Shenzhen Huaxing Road, Longhua Big Wave 40
URL: www.sztemwa.com
Main Products
Ultrasonic Power,Ultrasonic generator,High frequency ultrasonic wave s