SS Single point float level switces

used in air-conditioner, refrigerator, Boilers, vending mach

Product ID: LSDA-80

Send Inquiry

This is a stanard level switches, are ideal for sensing condensate tray level in heating, venting and air-conditioning systems. Feature high reliability and compact, miniature design, making them suitable for use in tight spaces
Mount mode: (Bottom or top) vertical Mounting
Mounting Threads: G1/8" or flange (according to client)
Mounting Attitude: Vertical?0
Electrical connection: 300mm length UL1430 AWG22
Special Gravity: 0.85g/cm3
Operating Temp. Range: -30℃~125℃
Operating Pressure: 1.80Mpa
Float model: Dia.28 high 28, thought hole dia.9.5
Stem Material: SUS304
Float ball Material: SUS316
Accuracy: ?mm in Water
Repeatability: ?mm in Water
Switch Rating: 70VA
Voltage: 250Vac, 200Vdc
Contact Mode: N.C./N.O
Control point: One point
Product Certified: EX, CQC, CE

Bent stem, made of stainless steel, with G1/8" threads. It is internal horizontal mounting level switches, applied to aerospace, air compressors, buck storage tanks, chemical dispensing systems, commercial restaurant industry, parts washers, power generation equipment, petrol and diesel pumps control and prevent.
Housing or stem
SUS304
Nut
SUS304
Float ball
Stainless steel SUS 316
Operating pressure
180 PSI max
Temperature range
-10~120℃
Carry current
1.5A
Switch current
0.7Amax
Switch voltage
200Vdc or 250 Vac
Power rating
50AV
Lead wire
AWG 22, 300mm length, UL1430,
Operating level
As drawing
Set point Accuracy
? mm in water
Mounting orientation
(Vertical amounting in bottom or top of v.)
As signal of flow direction Mounting orientation
Mounting thread and position
G1/8″according to client requirement on side of vessel

Made of SUS304, Typical installations, such as pipe plug, flange, and thread, Bulkhead etc is selected. Normally closed, or Normally open is selecthigh, low, middle liquid level sensing for almost any application, applied to aerospace, air compressors, buck storage tanks, chemical dispensing systems, commercial restaurant industry, parts washers, power generation equipment, petrol and diesel pumps control and prevent, commercial coffee machine
Parts name
Material and parameter
Housing or stem: SUS304
Nut: SUS304
Float ball: Stainless steel SUS 316
Operating pressure : 150 PSI max
Temperature range: -10~120℃
Carry current: 1.5A
Switch current : 0.7Amax
Switch voltage: 200Vdc or 250 V ac
Power rating : 50AV
Lead wire: AWG 22, 300mm length, UL1430,
Operating level: As drawing of client
Set point Accuracy : ? mm in water
Contact Mode: N.C./N.O
Control point:One point
Mounting thread : ZG1/2″; NPT1" or Flange
Product Certified: EX, CQC, CE

LSAZ-80-P is a horizontal internal mounting level switches, Made of Plastic (PP), lower cost, with M16 mounting threads. If you needed, It can be made of Nylon plastic material.
Item Single point Level switch
Mount mode
Internal Horizontal Mounting
Mounting Threads
M16
Operating Temp. Range
-10℃~75℃
Operating Pressure
0.8Mpa
Special Gravity
0.85g/cm3
Electrical connection
300mm length UL1430 AWG22
Float model
Dia.17, Length 47
Stem Material
PP
Float ball Material
PP
Accuracy
?mm in Water
Repeatability
?mm in Water
Switch Rating
70VA
Voltage
250Vac, 200Vdc
Contact Mode
N.C./N.O
Control point
One point
Product Certified
CQC,

flow switch, level switch, temperature switch, magnetic sensor