GVS-01 Gear Tooth Speed Sensor

used in air-conditioner, refrigerator, Boilers, vending mach

Product ID: GVS-01

Send Inquiry

GVS-01 Gear tooth speed sensor is made of Hall element,

GVS-01 Sensor is industrial-grade gear tooth speed senor, using an integrated Hall effect element, Near-zero speed, high accuracy, stainless steel or Brass housing. GVS Series gear tooth speed Sensor provides a user-friendly solution for digital gear tooth sensing applications, senses rotating ferrous gear tooth and other similar gear-tooth target.with BPS1/2" mounting threads, with adjustable two nuts and 1500mm cable.
Item
Parameter
Supply Voltage
5～24Vac
Target Speed
0～12000rpm
Output Voltage
225mv
Output Signal
Square pulse
Operating temperature
-40℃～125℃
Operating Air Grip
0.5～2.5mm
Mounting Direction
Mark on the bottom face according to the direction, the mounting axis is perpendicular to the direction of rotation.
Mounting Mode
M16*1.0 threads and 2 jam nuts to secure the sensor
Cable
Shielded Cable for particularly noisy environment or the length of cable is over 1500mm.
Gear Material
Low carbon steel
Gear Information
Diameter is 120mm
Thick ness 6mm
Tooth width 3mm
Valley width is 3mm
Valley depth is 3mm

The MHVS-01 Hall Magnetic sensors is difference from MPS series Magnetic proximity switches, the Hall magnetic sensor MHVS-01 is used of Hall effect element, the move target is multipole magnet.
Item
Parameter
Supply Voltage
5～24Vac
Supply Current
12mA max.
Output saturation Voltage
700mV max.
Output Current
25mA max
Operating temperature
-40℃～125℃
Release point (gauss)
60Gs(min)
Operate point (gauss)
300Gs max
Mounting Mode
M16*1.0 threads and 2 jam nuts to secure the sensor or according to client requirement
Cable
Shielded Cable for particularly noisy environment or the length of cable is over 1500mm.
Housing
Brass or stainless steel housing
Operation target Magnet

flow switch, level switch, temperature switch, magnetic sensor