Standard capacitance range tantalum chip capacitors with high heat resistance characteristics and ideal for high speed automatic mounting machine.
Features
- Small Chip: a series of case sizes based on 3.2 (L) x 1.6 (W)
- Automatic Insertion: easier mounting work to accept carrier tape
- High Solder Heat Resistance:
- Reflow: 260 Celsius, 10 sec
- Solder Dip
- A and B cases: 260 Celsius, 10 sec
- C.D and Do cases: 260 Celsius, 5 sec
- Termination Shape: easily recognizable polarity
- Characteristics: excellent in impedance as well as frequency characteristics
| No. | Item | Specification | Test Method |
|---|---|---|---|
| 1 | Operating Temp Range | 55 Celsius to 125 Celsius | N/A |
| 2 | Rated Voltage | 4 / 6.3 / 10 / 16 / 20 / 25 / 35 / 50 / V.DC | N/A |
| 3 | Surge Voltage | 5 / 8 / 13 / 30 / 26 / 32 / 44 / 65 / V.DC | at 85 Celsius |
| 4 | Derated Voltage | 2.5 / 4 / 6.3 / 10 / 13 / 16 / 22 / 32 / V.DC | at 125 Celsius |
| 5 | Capacitance Range | 0.10 ~ 220uf | at 120Hz |
| 6 | Capacitance Tolerance | ±20% (±10%) | at 120Hz |
| 7 | Leakage Current | 0.01CV (uA) or 0.5 uA which is greater | 5min, after rated voltage applied |
| 8 | Dissipation Factor | 0.1 ~ 1.5 0.04 / 2.2 ~ 6.8 0.06 / 10 ~ 68 0.08 / 68 ~ 220 0.10 | at 25 Celsius, 125 Hz |
| 9 | Surge Voltage Test | C/C: ±5% / Dissipation Factor: initial requirement / Leakage Current: initial requirement | at 85 Celsius / surge voltage for 30sec (Rs: 1k ohm) / Discharge: 6min / 1000cycle |
| 10 | Temperature Cycling Test | C/C: ±5% / Dissipation Factor: initial requirement / Leakage Current: initial requirement | - 55 Celsius to 125 Celsius, 100cycls |
| 11 | Damp Heat | C/C: ±5% / Dissipation Factor: initial requirement / Leakage Current: initial requirement | at 40 Celsius, 90 to 95% RH, 500hour |
| 12 | Load Life Test | C/C: ±5% / Dissipation Factor: initial requirement / Leakage Current: initial requirement | at 85 Celsius, Rated voltage applied 1000hour |
Main Products
film capacitor, electrolytic capacitor, TAN TA LUM capacitor