Specifications
- Station
- Mains Voltage: 110, 120/220, 240 VAC 50/60Hz
- Power Consumption: 20W
- Pump: diaphragm
- Air Spouting: 24 L/min. max.
- Dimensions: 180 (W) x 120 (H) x 240 (D)/110V, 190 (W) x 120 (H) x 270 (D)/220V
- Weight: 10.5 lb/110, 120V; 8kg/220, 240V
- Blower
- Heater: 320W (Ceramic)
- Preset Temp: 200 - 550 Celsius (single pin nozzle); 200 - 390 Celsius (standard nozzle)
- Cable: 1.2M (silicone)
- Weight: about 0.6ib (excluding pipe and cable)
- Accessories:
- Tweezers 1pcs
- Replacement Parts
- Ceramic Heater No.: Sa-027
- Tweezers No.: Sb014
Features
- It can solder and desolder various types of SMD devices, such as PLCC, QFP, SOJ, NSP, DIP...etc. It takes only 5-10 seconds to desolder a 100 pin QFP IC.
- The built-in air pump and air flow controller along with the heater temperature controller allows the operator to determine the correct time and temperature cycles.
- The anti-static design protects SMDs from damage by static electricity.
- The high performance ceramic heater provides the fastest heat with 100M ohm of insulation at 500 Celsius.
- The nozzles are fabricated with special alloy which resists deformation under long-term usage.
- The precision design and construction provides ease of operation and guarantees a long service life.
Main Products
BGA, SMD rework station, SMD hot air desolder and solder machine, SMD hot paste desolder and solder machine, SMD pick and place system, refold oven, desolder station, flexible PCB welding machine, solder ball, solder paste, flux and replace fixture