elbow machine
The Main Technical Parameters of The Machine
1 The oil cylinder:IDФ160mm,the rod inside: Ф120mm ，the effective trip: 4.m, pressure：21Mpa,2 bars
The maximum thrust of the 2 cylinders:85 tons; The forward speed: 0—170cm/min ,
The max backward speed:500cm/min.
2 The pump station：
63scy-plunger pump :1 set, 18.5KW Motor: 1set (the main working pump)
CB-50 gear pump 1 set,5.5kw motor 1 set.
The hydraulic valve is integrated oil rout, hydraulic back fork gate. Manual feeding.
3. The frame for the main engine: 16# channel steel, welded with 18kg steel rail
4 The panel for the main engine: welded with 16-18mm medium sheet
5 Distribution cabinets, operation box 1 set
6 Intermediate-frequency power (power 200KW 380v、220v、50Hz)
The technical feature of the main parts of the close water cooling machines:
the heat exchanger: made of deacidify copper tube, no fin, the tested pressure ≥1.0Mpa .The tubes designed to put in certain slope , it is goo
1 The oil cylinder:IDФ160mm,the rod inside: Ф120mm ，the effective trip: 4.m, pressure：21Mpa,2 bars
The maximum thrust of the 2 cylinders:85 tons; The forward speed: 0—170cm/min ,
The max backward speed:500cm/min.
2 The pump station：
63scy-plunger pump :1 set, 18.5KW Motor: 1set (the main working pump)
CB-50 gear pump 1 set,5.5kw motor 1 set.
The hydraulic valve is integrated oil rout, hydraulic back fork gate. Manual feeding.
3. The frame for the main engine: 16# channel steel, welded with 18kg steel rail
4 The panel for the main engine: welded with 16-18mm medium sheet
5 Distribution cabinets, operation box 1 set
6 Intermediate-frequency power (power 200KW 380v、220v、50Hz)
The technical feature of the main parts of the close water cooling machines:
the heat exchanger: made of deacidify copper tube, no fin, the tested pressure ≥1.0Mpa .The tubes designed to put in certain slope , it is goo
Certificate
- ISO9001:2010
Main Products
elbow machine,bending machine,tee machine,pipe expanding machine,molds