A brief introduction of Eccentric Casing system:
1. When drilling starts,the reamer swings out and reams the pilot-hole wide enough
for the casing tube to slide down behind the drill bit assembly.
2. When the required depth is reached,rotation is reversed carefully.where upon the reamer
swings in,allowing the drill bit assembly to be pulled up through the casing.
3.Casing Tubes are to be left in the drill hole should be sealed at the bottom of the hole by means of cement grout or some other sealing agent.
4.Drilling continues to the desired depth in the bedrock using a conventional drilling.
1. When drilling starts,the reamer swings out and reams the pilot-hole wide enough
for the casing tube to slide down behind the drill bit assembly.
2. When the required depth is reached,rotation is reversed carefully.where upon the reamer
swings in,allowing the drill bit assembly to be pulled up through the casing.
3.Casing Tubes are to be left in the drill hole should be sealed at the bottom of the hole by means of cement grout or some other sealing agent.
4.Drilling continues to the desired depth in the bedrock using a conventional drilling.
Certificate
- ISO9001:2008
Main Products
Rock drilling tools,DTH Hammer,DTH Bit,Button Bit,Chisel Bit,Coulping