1.Application:
silicon insole, Silicone Gel Toe Spreaders,Silicone Gel Arch Supports, Silicone Gel Metatarsal Pad, silicon pads, Silicone Gel Heel Cups
2.Advantage:
-High transparency.
-. High fluidity, high curing rate.
- Pressure release.
- Shock absorption.
-Multiple density
3.Package and storage
-20kg or 200kg /drum.
- It is a kind of non-dangerous goods, and it should be stored at a cool and dry place, please keep it from sun and rain.
4.Typical datasheet:
Model
Q625#
Q630#
Appearance
Transparent
Transparent
Mixing Ratio
1:1
1:1
Operating time (Mins 25°C)
30 -50
30 -50
Curing time (H 25°C)
3 - 5
3 - 5
Curing time (Mins 60°C)
20 - 30
20 - 30
Hardness (A°)
25±2
30±2
Density ( g/cm 3 )
1.08
1.08
Viscosity (CS) (After mixed)
8000 ± 500
8500 ± 500
Tensile-strength( kgf /cm2 )
45 ± 5
45 ± 5
Tear-strength (kgf /cm2 )
14 ± 2
17 ± 2
Elongation-break(%)
450 ± 50
400 ± 50
Retractility(%)
≤0.1
≤0.1
silicon insole, Silicone Gel Toe Spreaders,Silicone Gel Arch Supports, Silicone Gel Metatarsal Pad, silicon pads, Silicone Gel Heel Cups
2.Advantage:
-High transparency.
-. High fluidity, high curing rate.
- Pressure release.
- Shock absorption.
-Multiple density
3.Package and storage
-20kg or 200kg /drum.
- It is a kind of non-dangerous goods, and it should be stored at a cool and dry place, please keep it from sun and rain.
4.Typical datasheet:
Model
Q625#
Q630#
Appearance
Transparent
Transparent
Mixing Ratio
1:1
1:1
Operating time (Mins 25°C)
30 -50
30 -50
Curing time (H 25°C)
3 - 5
3 - 5
Curing time (Mins 60°C)
20 - 30
20 - 30
Hardness (A°)
25±2
30±2
Density ( g/cm 3 )
1.08
1.08
Viscosity (CS) (After mixed)
8000 ± 500
8500 ± 500
Tensile-strength( kgf /cm2 )
45 ± 5
45 ± 5
Tear-strength (kgf /cm2 )
14 ± 2
17 ± 2
Elongation-break(%)
450 ± 50
400 ± 50
Retractility(%)
≤0.1
≤0.1
Main Products
RTV molding silicone,shoe mold rubber,pad printing silicon,silicon oil