teflon rod
PTFE/Teflon rod can be made by extruded and molded techniques, so both extruded PTFE (teflon) rod and molded PTFE (teflon) rod can be offered. Meanwhile, we can use virgin, recycled or mixed PTFE material to make PTFE rod as your requirements.
Extruded teflon PTFE rod can be used as lining, seal components, wire isolation, slide block, gasket, seal, dielectric material and so on.
Remarks:
We can also produce PTFE/Teflon rod in other diameters and lengths according to customers requirements.
Specification:
Diameter(mm) Length(mm)
Nominal Tolerance Nominal Tolerance
5,6 +0.480 100 +5.0
7,8,9 +0.580 100 +5.0
10,13,15,16,18 +1.100 100,1000 +3.60
20,25,30 +1.130 100,1000 +3.60
35,40,45,50 +1.600 100,1000 +3.60
55,60,65,70,75,80,85,90,100 +2.000 100,1000 +2.50
110,120,150,200 +2.500 100,1000 +2.50
Properties：
Item Data
Apparent density 2.10-2.30 g/ cm3
Tensile Strength ≥14 Mpa
Elongation at break ≥140%
Working Temp -180~260℃
Melting point 330℃
Produce Max.Temp
Extruded teflon PTFE rod can be used as lining, seal components, wire isolation, slide block, gasket, seal, dielectric material and so on.
Remarks:
We can also produce PTFE/Teflon rod in other diameters and lengths according to customers requirements.
Specification:
Diameter(mm) Length(mm)
Nominal Tolerance Nominal Tolerance
5,6 +0.480 100 +5.0
7,8,9 +0.580 100 +5.0
10,13,15,16,18 +1.100 100,1000 +3.60
20,25,30 +1.130 100,1000 +3.60
35,40,45,50 +1.600 100,1000 +3.60
55,60,65,70,75,80,85,90,100 +2.000 100,1000 +2.50
110,120,150,200 +2.500 100,1000 +2.50
Properties：
Item Data
Apparent density 2.10-2.30 g/ cm3
Tensile Strength ≥14 Mpa
Elongation at break ≥140%
Working Temp -180~260℃
Melting point 330℃
Produce Max.Temp
Certificate
- ISO
- ROHS
- REACH
Main Products
PTFE sheet, ptfe rod, ptfe tube, ptfe tape, nylon rod, nylon tube