silicone rubber for tire mold making
Addition cure silicone rubber for tire mold making operation:
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3 minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water)
on your product.
Need any help on silicone rubber, please feel free to contact Ms Vicky:
Tel:86-755-89212382
Mob/Whatsapp:86-18988789545
E-mail: hyz(at)szrl(dot)net
Skype:vicky921106
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3 minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water)
on your product.
Need any help on silicone rubber, please feel free to contact Ms Vicky:
Tel:86-755-89212382
Mob/Whatsapp:86-18988789545
E-mail: hyz(at)szrl(dot)net
Skype:vicky921106
Certificate
- 00001
Main Products
RTV-2 molding silicone, addition silicone solid silicone rubber