ladle
Low-pressure die casting is a process in which molten metal is transported from a holding furnace via a riser tube into a mould. Riser tube is the critical part of the process.
During traditional production, steel riser tube can not satisfy the requirements of continuous production and high quality, so aluminium titanate becomes ideal material of riser tube due to its low thermal expansion coefficient, good thermal shock resistance and no wetting by molten metal.
Our aluminium titanate riser tube produced by german patent get long service life and its combination property can reach the international advanced level.
Property:
bulk density 3.3-3.5g/cm3
flexural strength 40-60MPa
porosity < 8%
thermal-expansion coefficient 0.5-1.5*10-6/°C
heat conductivity 0.86W/m.k
During traditional production, steel riser tube can not satisfy the requirements of continuous production and high quality, so aluminium titanate becomes ideal material of riser tube due to its low thermal expansion coefficient, good thermal shock resistance and no wetting by molten metal.
Our aluminium titanate riser tube produced by german patent get long service life and its combination property can reach the international advanced level.
Property:
bulk density 3.3-3.5g/cm3
flexural strength 40-60MPa
porosity < 8%
thermal-expansion coefficient 0.5-1.5*10-6/°C
heat conductivity 0.86W/m.k
Main Products
Silicon Nitride Products,Aluminum Silicate Products,Aluminum Titanate