All in one heat pump DKRS-015T/200L
Heat pump water heater:
1)Small in size,more compact
2)More high efficiency/COP can reach to 4.5
3)More instant heating
4)Quiet/automation
DEAKON All in one heat pump is a mechine combine with the water heat pump and the water tank. The water heat pump upper half is main unit, under half is water tank.The whole units is installed outdoors, preferably near the house’s bathroom or connect to the water supply or get near by power supply place.
DEAKON all in one air source heat pump water heater features:
1, Instant heating, heating rate: 1°C/3 Min.
2, High efficiency, COP can reach 4.5. Using energy efficient compressors, low operating cost. Comprehensive power consumption is only 65% of the solar energy water heater, 25% of electric water heaters.
3, Heat preservation time lasts longer.
4, Authentically achieve water and electricity separation, much safer. Separation from water and electricity, no produce exhaust,no combustion emissions to prevent leakage and gas poisoning. Integration design, fully welded closed refrigeration system,without refrigerant pipe connections, more simple and reliable installation.
5, Inner water tank apply 2B SUS304, more sanitary.
6, Low noise, more quiet. Except heating function,the unit also can be used indoor waste heat recovery, partial dehumidification, storage room cooling, ventilation.
7, Easy to use, hot water supplied while the tap is opened and maintenance free. Intelligent design, large-screen LCD display, easy operation, 30°c - 60°c free setting, cycle timing can be set on/off, with power failure momery function, automatic high-temperature sterilization (optional).
8, Specific double side welding and welding protection to avoid leaking from pressure-bearing water tank.
9, Easy installation, Integrated design and installation. Adopts streamline appearance,combined with indoor decoration,more high-grade,long-life.
10, Intelligent and automatic control, defrosting automatically, total pressure-bearing design and hot water supply more easy, making you enjoying the bath and your life.
DKRS-015T/200L
Technical data:1.5P
Rated input power(Kw):1.35
Max input power(Kw):1.75
Rated input current(A):6.0
Max input current(A):8.8
Power(V/Hz):220/50
Max outlet temp(°):60
Rated outlet temp(°):55
Rated outlet pressure(MPa):0.7
Water yield(L/Hz 15~55):128
COP:2~4.5
Outline dimension(mm):φ560*1630
Water pipe interface size:G1/2
Ambient temp range(°):-5~40
Weight(Kg):69
Noise:≤50dB(A)
Compressor Qty:1
This data‘s from the test at good ventilation :Ambient temperature: dry-bulb temperature 20°C/wet bulb temperature15°C. water input temperature 15°C, water out temperature 55°C.
1)Small in size,more compact
2)More high efficiency/COP can reach to 4.5
3)More instant heating
4)Quiet/automation
DEAKON All in one heat pump is a mechine combine with the water heat pump and the water tank. The water heat pump upper half is main unit, under half is water tank.The whole units is installed outdoors, preferably near the house’s bathroom or connect to the water supply or get near by power supply place.
DEAKON all in one air source heat pump water heater features:
1, Instant heating, heating rate: 1°C/3 Min.
2, High efficiency, COP can reach 4.5. Using energy efficient compressors, low operating cost. Comprehensive power consumption is only 65% of the solar energy water heater, 25% of electric water heaters.
3, Heat preservation time lasts longer.
4, Authentically achieve water and electricity separation, much safer. Separation from water and electricity, no produce exhaust,no combustion emissions to prevent leakage and gas poisoning. Integration design, fully welded closed refrigeration system,without refrigerant pipe connections, more simple and reliable installation.
5, Inner water tank apply 2B SUS304, more sanitary.
6, Low noise, more quiet. Except heating function,the unit also can be used indoor waste heat recovery, partial dehumidification, storage room cooling, ventilation.
7, Easy to use, hot water supplied while the tap is opened and maintenance free. Intelligent design, large-screen LCD display, easy operation, 30°c - 60°c free setting, cycle timing can be set on/off, with power failure momery function, automatic high-temperature sterilization (optional).
8, Specific double side welding and welding protection to avoid leaking from pressure-bearing water tank.
9, Easy installation, Integrated design and installation. Adopts streamline appearance,combined with indoor decoration,more high-grade,long-life.
10, Intelligent and automatic control, defrosting automatically, total pressure-bearing design and hot water supply more easy, making you enjoying the bath and your life.
DKRS-015T/200L
Technical data:1.5P
Rated input power(Kw):1.35
Max input power(Kw):1.75
Rated input current(A):6.0
Max input current(A):8.8
Power(V/Hz):220/50
Max outlet temp(°):60
Rated outlet temp(°):55
Rated outlet pressure(MPa):0.7
Water yield(L/Hz 15~55):128
COP:2~4.5
Outline dimension(mm):φ560*1630
Water pipe interface size:G1/2
Ambient temp range(°):-5~40
Weight(Kg):69
Noise:≤50dB(A)
Compressor Qty:1
This data‘s from the test at good ventilation :Ambient temperature: dry-bulb temperature 20°C/wet bulb temperature15°C. water input temperature 15°C, water out temperature 55°C.
Certificate
- CE
- EMC
- CCC
Main Products
heat pump water heater, solar water heater