MTF electromagnetic flowmeter, composed of sensor and converter, works based on Faradays law of electromagnetic induction. It is used to measure electricalconductivity of liquid or solid. Generally, the electrical
conductivity should be over 5uS/cm (electrical conductivity of tap water, raw water is about 100-500uS/cm. It can also be used to measure various mediums like acid, alkali, saline solution, paper pulp, ore pulp and so on, but these mediums can contain a lot of magnetic materials and bubbles.

Technical Parameters

MTF Electromagnetic Flowmeter

Divided type/ Integrated type
Integrated type

with explosion proof

Basic Error
±0.2% or ±0.5% of indicated value

Diameter(mm)
DN15-DN2400
DN15-DN600

Explosive-Proof Level
________
ExdmibllCT6

Flange
Accord withGB119 standard Carbon steel (Stainless steel is optional)


Pressure Level
DN15-DN600 1.0,1.6,2.5,4.0MPa
DN15-DN600 1.0,1.6,2.5,4.0MPa

DN3-DN600 1.0,1.6,2.5,4.0MPa

DN700-DN2400 0.6MPa


Please consult with us if you order special pressure

Lining Materials
PTFE, PU,CR, PFA, F46, IR

Conductivity
≥5μS/cm(Please consulate with us if less than 5μS/cm)

Electrode
316L, Hastelloy, Ti, Ta, Pt- Ir

Protection Level
IP67 (for sensor, IP68 is optional)
IP67

Medium Temperature
-25°C-140°C (please refer to the choice of lining material)
-25°C-80°C (please refer to the choice of lining material)

Ambient Temperature
-25°C-60°C

Influence of Ambient Temperature