Products
  • Products
  • Suppliers
  • Categories

LED Auto 3D Logo Laser Lights for Different Brands,Custom Logo Available

Product ID: G3

Send Inquiry
More than 100 different logo options,custom logo design is acceptable,you can have your own DIY logos!!!



This LED Door Lights can be automaticlly on when car doors open.

Outpower:3W/5W

Voltage:12V/24V

Working Temp:-40 degrees~ 105 degrees

Material:Aluminium alloy casing

Life span:30,000-50,000 hours

Certification:E4 / RDW


Installation:

This LED lights can be installed at the bottom of the door flame and make sure the Len vertical with the ground ;

1.Pull down the inside door board first. Mark the suitable location for drilling a hole.

2.Drill the hole on the door board with our borer .

3.Inset the product from the bottom of car door ,then arrange the power cord.

4.Install the nut through the power cord upon the hole inside; Tighten the nut;

5.Connect the power cord according to the installation guide;

6.Adjust the lamp projection to the suitable place with wrench tool.

7.Reinstall the inside door board,then check the final effect.
Certificate
  • RDW/EMARK-4

Main Products

LED Car Logo Laser Lights,LED Ghost Shadow Light,LED Work light,LED Sp