Oxide bonded silicon carbide plates Kiln furniture
1.Description
Oxide Bonded Sic material naturally has good properties of large heat radiation and heat strength.In our plant,it is mainly produced as thin kiln refractory materials,for example, beams,Pillar,Batts and Sagger and so on.These products cannot only reduce the kiln capacity, but also raise kiln loading capacity and product quality, shorten the production cycle,is the ideal indirect materials for ceramic glazed bake&sintering.
2.Application:Used asKiln shed board, beams,slide push board, sagger,and so on.
3.Parameter:
item Data
SiC%≥ 85
Fe2O3 %≥ 0.5
Density g/cm3≥ 2.60
Apparent porosity %≤ 13-17
Cold Modulus of Rupture Mpa≥ 30
Refractoriness (Degree) 1750
Compressive strength MPA≥ 120
1.Description
Oxide Bonded Sic material naturally has good properties of large heat radiation and heat strength.In our plant,it is mainly produced as thin kiln refractory materials,for example, beams,Pillar,Batts and Sagger and so on.These products cannot only reduce the kiln capacity, but also raise kiln loading capacity and product quality, shorten the production cycle,is the ideal indirect materials for ceramic glazed bake&sintering.
2.Application:Used asKiln shed board, beams,slide push board, sagger,and so on.
3.Parameter:
item Data
SiC%≥ 85
Fe2O3 %≥ 0.5
Density g/cm3≥ 2.60
Apparent porosity %≤ 13-17
Cold Modulus of Rupture Mpa≥ 30
Refractoriness (Degree) 1750
Compressive strength MPA≥ 120
Main Products
refractory brick,silicon carbide kiln furniture,firebrick