yaesu ft-950 transceiver for my us friend
FT-950 HF+6 TRANSCEIVER
Now includes additional features of PEP950-Performance Enhancement Program
The FT-950, the newest radio in the direct lineage of the FTDX-9000 and FT-2000 series radios, has been developed to fit the needs of both casual and serious DX enthusiasts, as well as new HF licensees eagerly seeking to discover the magic of the HF and 50MHz bands. Prospective owners will find that this radio comes in an appropriately-sized desktop package that provides them with loads of easily located controls and features to ensure they enjoy all of the excitement available on the 160 through 6 meter Amateur Radio bands.
FT-950 Specifications
GENERAL
RX Frequency Range: 30 kHz to 56 MHz
TX Frequency Ranges: 160 to 6 m (Amateur bands only)
Frequency Stability: ?.5 ppm (after 1 min. @ 25 °C)
Operating Temperature Range: 14 ° - 122° F (-10 °C ~ +50 °C)
Emission Modes: LSB, USB, CW, F3E FM, F1B RTTY, F1D Packet, F2D Packet
Frequency Steps: 1/10 Hz for SSB/CW/AM
0 100 Hz for FM
Antenna Impedance: 50 ohms balanced, 16.7 to 150 Ohms, unbalanced (Tuner ON, TX only)
Power Consumption: 13 VDC
RX (no signal) 2.0A
RX (signal) 2.5A
TX (100 W) 22 A
Supply Voltage: 13.8 VDC
Dimensions (WHD): 14.4 x 4.5 x 12.4 inches
Weight (approx.): 28.7 lbs.
0
TRANSMITTER
Power Output: Adjustable 5 to 100 watts (2-25 watts AM carrier),
0 50% @ 100 watts (FM & RTTY, 3-minute TX)
Modulation Types: J3E (SSB) Balanced,
A3E (AM) Low-level (early stage),
F3E (FM) Variable reactance,
Maximum FM Deviation: ?.0 / ?.5 kHz
Harmonic Radiation: Better than -60 dB (Typical)
SSB Carrier Suppression: At least 60 dB below peak output
Undesired Sideband Suppression: At least 60 dB below peak output
Audio Response (SSB): Not more than -6 dB from 300 to 2700 Hz
3rd-order IMD: - 31 dB 14 MHz @ 100 watts PEP
Microphone Impedance: 600 Ohms (200 to 10k ohms)
0
RECEIVER
Circuit Type: Triple-conversion superheterodyne (VFO-A)
Intermediate Frequencies: 0
VFO A: 69.450 MHz/450 kHz/30 kHz [24kHz for AM/FM]
Sensitivity:
Modes 0.5 - 1.8 MHz 1.8 - 30 MHz 50 - 54 MHz
SSB (2.4 kHz) 2 uV 0.2 uV 0.125 uV
AM (6 kHz) 6 uV 2 uV 1 uV
FM - 0.5 uV (28-30 MHz) .35 uV
(with RF2 amp on)
Selectivity (-6/-60 dB):
Modes Min. -6 dB BW Max. -60 dB
SSB 2.4 kHz 3.6 kHz
AM 6 kHz 15 kHz
CW/RTTY/Packet 500 Hz 750 Hz
FM 15 kHz 25 kHz
IF Rejection (1.8 ~ 30 MHz):
Image Rejection (1.8 ~ 30 MHz): 70 dB or better (160-10m)
Maximum Audio Output: 2.5 W into 4 Ohms with
Now includes additional features of PEP950-Performance Enhancement Program
The FT-950, the newest radio in the direct lineage of the FTDX-9000 and FT-2000 series radios, has been developed to fit the needs of both casual and serious DX enthusiasts, as well as new HF licensees eagerly seeking to discover the magic of the HF and 50MHz bands. Prospective owners will find that this radio comes in an appropriately-sized desktop package that provides them with loads of easily located controls and features to ensure they enjoy all of the excitement available on the 160 through 6 meter Amateur Radio bands.
FT-950 Specifications
GENERAL
RX Frequency Range: 30 kHz to 56 MHz
TX Frequency Ranges: 160 to 6 m (Amateur bands only)
Frequency Stability: ?.5 ppm (after 1 min. @ 25 °C)
Operating Temperature Range: 14 ° - 122° F (-10 °C ~ +50 °C)
Emission Modes: LSB, USB, CW, F3E FM, F1B RTTY, F1D Packet, F2D Packet
Frequency Steps: 1/10 Hz for SSB/CW/AM
0 100 Hz for FM
Antenna Impedance: 50 ohms balanced, 16.7 to 150 Ohms, unbalanced (Tuner ON, TX only)
Power Consumption: 13 VDC
RX (no signal) 2.0A
RX (signal) 2.5A
TX (100 W) 22 A
Supply Voltage: 13.8 VDC
Dimensions (WHD): 14.4 x 4.5 x 12.4 inches
Weight (approx.): 28.7 lbs.
0
TRANSMITTER
Power Output: Adjustable 5 to 100 watts (2-25 watts AM carrier),
0 50% @ 100 watts (FM & RTTY, 3-minute TX)
Modulation Types: J3E (SSB) Balanced,
A3E (AM) Low-level (early stage),
F3E (FM) Variable reactance,
Maximum FM Deviation: ?.0 / ?.5 kHz
Harmonic Radiation: Better than -60 dB (Typical)
SSB Carrier Suppression: At least 60 dB below peak output
Undesired Sideband Suppression: At least 60 dB below peak output
Audio Response (SSB): Not more than -6 dB from 300 to 2700 Hz
3rd-order IMD: - 31 dB 14 MHz @ 100 watts PEP
Microphone Impedance: 600 Ohms (200 to 10k ohms)
0
RECEIVER
Circuit Type: Triple-conversion superheterodyne (VFO-A)
Intermediate Frequencies: 0
VFO A: 69.450 MHz/450 kHz/30 kHz [24kHz for AM/FM]
Sensitivity:
Modes 0.5 - 1.8 MHz 1.8 - 30 MHz 50 - 54 MHz
SSB (2.4 kHz) 2 uV 0.2 uV 0.125 uV
AM (6 kHz) 6 uV 2 uV 1 uV
FM - 0.5 uV (28-30 MHz) .35 uV
(with RF2 amp on)
Selectivity (-6/-60 dB):
Modes Min. -6 dB BW Max. -60 dB
SSB 2.4 kHz 3.6 kHz
AM 6 kHz 15 kHz
CW/RTTY/Packet 500 Hz 750 Hz
FM 15 kHz 25 kHz
IF Rejection (1.8 ~ 30 MHz):
Image Rejection (1.8 ~ 30 MHz): 70 dB or better (160-10m)
Maximum Audio Output: 2.5 W into 4 Ohms with
Main Products
yaesu transceiver, icom transceiver, ham radio, two way radio