Configuration Digital servo system, Flatbed
Media hold-down method Electrostatic adhesion or Adhesive sheet Adhesive mat or Adhesive sheet
Effective cutting area 590 x 430 mm (23.2 x 16.9 inch) 860 x 600 mm (33.8 x 23.6 inch)
Mountable media 500 mm (19.6 inch) (Y-axis direction) 666 mm (26.2 inch) (Y-axis direction)
Media type Marking film (vinyl, fluorescent and reflective)
Stiff paper/card (for stencils etc.) up to 0.5 mm thick *1
Polystyrene foam sheets up to 0.8 mm thick *2
Sandblast rubber sheets up to 1.0 mm thick *2
Microflute board (F/G grades)
Clear sheets for plastic boxes
High-intensity reflective film *3
Maximum cutting speed 750 mm/s (30 inch/s) (1 to 75 cm/s in 23 steps)
Cutting pressure Tool 1: Max. 5.88 N (600 gf), in 48 steps
Tool 2: Max. 2.94 N (300 gf), in 30 steps Tool 1, Tool 2: Max. 5.88 N (600 gf), in 48 steps
Minimum character size approx. 5 mm square (varies with the character font and media)
Mechanical resolution 0.005 mm (5μm)
Programmable res
Media hold-down method Electrostatic adhesion or Adhesive sheet Adhesive mat or Adhesive sheet
Effective cutting area 590 x 430 mm (23.2 x 16.9 inch) 860 x 600 mm (33.8 x 23.6 inch)
Mountable media 500 mm (19.6 inch) (Y-axis direction) 666 mm (26.2 inch) (Y-axis direction)
Media type Marking film (vinyl, fluorescent and reflective)
Stiff paper/card (for stencils etc.) up to 0.5 mm thick *1
Polystyrene foam sheets up to 0.8 mm thick *2
Sandblast rubber sheets up to 1.0 mm thick *2
Microflute board (F/G grades)
Clear sheets for plastic boxes
High-intensity reflective film *3
Maximum cutting speed 750 mm/s (30 inch/s) (1 to 75 cm/s in 23 steps)
Cutting pressure Tool 1: Max. 5.88 N (600 gf), in 48 steps
Tool 2: Max. 2.94 N (300 gf), in 30 steps Tool 1, Tool 2: Max. 5.88 N (600 gf), in 48 steps
Minimum character size approx. 5 mm square (varies with the character font and media)
Mechanical resolution 0.005 mm (5μm)
Programmable res
Main Products
Printer , Plotter , Large format printer