HELP--100 100W CO2 Laser Power Supply
1.Main features:
1.Main features:
1. High output voltage and high output current: When inputting AC220V and outputting current up to 38mA, the voltage can be up to 25KV.
2. Fast response speed: It can observably enlarge laser power and prolong laser tubes service life.
3. Easy Control: The start and stop of laser can be easily controlled by TTL level.
4. The power supply has output open circuit protection.
5. This power supply has TTL signal indication, water Through signal indication and laser output indication.
6. This power supply has the BUTTON to test it work properly
7. Application: Cut thick acrylic and fabric.
2.Specification:
AC Input Voltage AC220V or AC110V
DC Input Voltage DC300V or DC150V
AC Input Frequency 47~440Hz
Voltage Output 50KV
Maximum Current 38mA (depending on the laser tubes of different manufacturers)
Efficiency 91%
Overcurrent Protection 130% of maximum current
Open Circuit Protection Yes (short term)
Structure Fan cooling
High Electric Level Control Voltage Range more than 3V
Low Electric Level Control Voltage Range less than 0.8V
Working Temperature -30 -- +65
Relative Humidity 20~85%RH(no condensation)
Voltage Resistance Input— Output AC1500V1minutesless than 10mA
Input— Shell AC1500V1 minutesless than 10mA
Output— Shell Connection
Insulation Resistance more than 50MOHM (DC500V)
Earth Leakage Current less than 1mA(AC220V)less than 0.5 mA(AC110V)
Vibration Resistance Amplitude: 0.5mm frequency 10~55Hz3 dimensional direction 2 hours
MTBF more than 30, 000hours
Test Time at Full Load and 60° C 12 hours
Power Supply Switch Test within 7 Seconds 500 times
Maximum Dimensions (L×W×H) 350mm×220mm×95mm