LED tube light ManJia
Specification of T8 led tube:
1) Light Color: Warm White(2800~3800K), Pure White(4200~6400K), Cool White(>7000K), Red, Green, Blue, Yellow are available.
2) Diameter: 26mm ...
3) Length: 600mm,900mm,1000mm, 1200mm, 1500mm, 1800mm, 2400mm
4) Rated Voltage: 85-265VAC, 50/60Hz
5) Rated Wattage: 8W,10w, 12w, 15w,20w,22W
6) Luminous Flux:110lm/w for led
7) Working Voltage: AC 80~130V or 160~250V, 50/60Hz
8) Lighting Source: Super bright 0.1W for each LEDs
9) Lifespan: 50,000+ Hours (5+ Years)
10) Suitable for traditional T8 fluorescent brackets
Application of led tube:
1. Living room, bedroom, kitchen, washroom;
2. School, university, hospital, hotel;
3. Conference, meeting room, show room, showcase;
4. Commercial complexes;
5. Factory, plant, warehouse, office;
6. Supermarket, department store
Advantage of led tube light :
1.Degradation:Lumen maintenance of greater than 95% on average after 1,000 hrs continuous aging test .
2.We have the R&D department to support and can supply the products according to your design and requirements.
3.Energy saving ,saving 50% than the traditional lights at the same brightness.
4.Long life-span, more than 50,000 hours
5.Inner high efficiency(95%)heat protection system, with the latest high efficiency and constant currency driver, making the products can work under
unstable voltage.
6.Instant start, no flickering, no humming
7.Professional circuit design, each LED can work separately, thus it can avoid the influence caused .
by a broken single LED.
8.Anti-electric wave, no RF interference.
9.No such hazard as mercury or lead enters the environment.
How to Install T8 led tube:
The same size tube can be installed on to the corresponding lamp holder directly before taking
down fluorescent lamp starter.
1. LED tube can be directly installed into T8 or T10 bracket(take down fluorescent lamp starter);
2. LED tube light apply to inductive light holder. Electronic ballast fluorescent tube can’t be replaced directly,should take down electronic ballast.
Special service:We accept unconditional return within 10 days after the receipt of goods&sample, and full payment will be back to buyer.
Man Jia has more than 8years in making led lights,led tube lights.
If any inquiry about led lights welcome to contact with us.
1) Light Color: Warm White(2800~3800K), Pure White(4200~6400K), Cool White(>7000K), Red, Green, Blue, Yellow are available.
2) Diameter: 26mm ...
3) Length: 600mm,900mm,1000mm, 1200mm, 1500mm, 1800mm, 2400mm
4) Rated Voltage: 85-265VAC, 50/60Hz
5) Rated Wattage: 8W,10w, 12w, 15w,20w,22W
6) Luminous Flux:110lm/w for led
7) Working Voltage: AC 80~130V or 160~250V, 50/60Hz
8) Lighting Source: Super bright 0.1W for each LEDs
9) Lifespan: 50,000+ Hours (5+ Years)
10) Suitable for traditional T8 fluorescent brackets
Application of led tube:
1. Living room, bedroom, kitchen, washroom;
2. School, university, hospital, hotel;
3. Conference, meeting room, show room, showcase;
4. Commercial complexes;
5. Factory, plant, warehouse, office;
6. Supermarket, department store
Advantage of led tube light :
1.Degradation:Lumen maintenance of greater than 95% on average after 1,000 hrs continuous aging test .
2.We have the R&D department to support and can supply the products according to your design and requirements.
3.Energy saving ,saving 50% than the traditional lights at the same brightness.
4.Long life-span, more than 50,000 hours
5.Inner high efficiency(95%)heat protection system, with the latest high efficiency and constant currency driver, making the products can work under
unstable voltage.
6.Instant start, no flickering, no humming
7.Professional circuit design, each LED can work separately, thus it can avoid the influence caused .
by a broken single LED.
8.Anti-electric wave, no RF interference.
9.No such hazard as mercury or lead enters the environment.
How to Install T8 led tube:
The same size tube can be installed on to the corresponding lamp holder directly before taking
down fluorescent lamp starter.
1. LED tube can be directly installed into T8 or T10 bracket(take down fluorescent lamp starter);
2. LED tube light apply to inductive light holder. Electronic ballast fluorescent tube can’t be replaced directly,should take down electronic ballast.
Special service:We accept unconditional return within 10 days after the receipt of goods&sample, and full payment will be back to buyer.
Man Jia has more than 8years in making led lights,led tube lights.
If any inquiry about led lights welcome to contact with us.
Certificate
- CE&ROHS&FCC
Main Products
LED lights/led strip/led tube/led bulb/led panel/led down light