1. Description: Under the authorized patents approval in China & Germany of Original Flexo Ink-offering system & Offset Rubber Fabric printing technology, absorbed some techniques from Europe & America.
Production process of the machine: Unwing → Printing →Dryer→Cutting (or direct Winding)
2. With below characteristics:
a)Change printing or cutting length: No need to change printing rollers or gears in different size printing, directly set on Human-Machine-Interface (HMI) touching monitor, length range 400-1200mm at will.
b)Accuracy color register: The thickness or the tension of rolled fabrics and the speed of printing never affects the printing accuracy. Color register allowance: less than or equal to +/-0.2mm.
c) One step two sides 8 colors (Front side: 5 colors + Back side: 3 colors) printing with accurate & sharp printing result. Immediately printing once machine turned on and Pre-color-register is unnecessary.
d)Heat cutter’s cutting knife driven by servo motor with accurate cutting result & without printing accumulative error. It is the first unit adopted this technique in China.
e) Referring to Germany W&H AG’s technique on Flexo Printing Machine, printing unit adopts bevel gear driven, the fine turning device for horizontal & vertical registering achieves online (in machine running) quick color register adjusting in quantitative and positioning at one time.
3. Specification:
1) Applicant: tubular woven fabric, laminated woven fabric, woven combining fabric.
2) Max. fabric width: 800mm
3) Max. fabric roll diameter for unwinding: ∮1200mm
4) Max. printing width: 720mm
5) Max. bag length: 400-1200mm (Omnipotent Size)
6) Printing length: 300-930mm
(Omnipotent Size，No need to change printing rollers or gears)
7) Printing production speed: 80pcs/min. (Take bag length as 800mm)
8) Cutting production speed: 65pcs/min. (Take bag length as 800mm)
9) Auto EPC travel: +/-100mm
10) Printing colors: two sides 8 colors (Front side: 5 colors + Back side:3 colors)
(5+3, 5+2, 5+1, 4+3, 4+2……)
11)Printing cylinder correction: vertical range at 7.5mm, horizontal range at 10mm, online adjustable (in machine running status)
4. Components:
The machine components include 1.Two-channel unwinding unit, 2.Fabric feeding transaction unit, 3.Automatic printing unit, 4.Ink automatic circulation system, 5.Drying unit, 6.Cutting unit, 7.Automatic winding unit, 8.Electrical control system.
Characteristics
Applicant: Roll fabric, as laminated/tubular woven fabric, paper combined woven fabric, non-woven and etc.
Printing/cutting length set at will, No need to change any plate roller
360 Degrees adjusting print plate, online (in running) promptly quantitative adjusting device for horizontal & vertical positioning & print registering
Production process of the machine: Unwing → Printing →Dryer→Cutting (or direct Winding)
2. With below characteristics:
a)Change printing or cutting length: No need to change printing rollers or gears in different size printing, directly set on Human-Machine-Interface (HMI) touching monitor, length range 400-1200mm at will.
b)Accuracy color register: The thickness or the tension of rolled fabrics and the speed of printing never affects the printing accuracy. Color register allowance: less than or equal to +/-0.2mm.
c) One step two sides 8 colors (Front side: 5 colors + Back side: 3 colors) printing with accurate & sharp printing result. Immediately printing once machine turned on and Pre-color-register is unnecessary.
d)Heat cutter’s cutting knife driven by servo motor with accurate cutting result & without printing accumulative error. It is the first unit adopted this technique in China.
e) Referring to Germany W&H AG’s technique on Flexo Printing Machine, printing unit adopts bevel gear driven, the fine turning device for horizontal & vertical registering achieves online (in machine running) quick color register adjusting in quantitative and positioning at one time.
3. Specification:
1) Applicant: tubular woven fabric, laminated woven fabric, woven combining fabric.
2) Max. fabric width: 800mm
3) Max. fabric roll diameter for unwinding: ∮1200mm
4) Max. printing width: 720mm
5) Max. bag length: 400-1200mm (Omnipotent Size)
6) Printing length: 300-930mm
(Omnipotent Size，No need to change printing rollers or gears)
7) Printing production speed: 80pcs/min. (Take bag length as 800mm)
8) Cutting production speed: 65pcs/min. (Take bag length as 800mm)
9) Auto EPC travel: +/-100mm
10) Printing colors: two sides 8 colors (Front side: 5 colors + Back side:3 colors)
(5+3, 5+2, 5+1, 4+3, 4+2……)
11)Printing cylinder correction: vertical range at 7.5mm, horizontal range at 10mm, online adjustable (in machine running status)
4. Components:
The machine components include 1.Two-channel unwinding unit, 2.Fabric feeding transaction unit, 3.Automatic printing unit, 4.Ink automatic circulation system, 5.Drying unit, 6.Cutting unit, 7.Automatic winding unit, 8.Electrical control system.
Characteristics
Applicant: Roll fabric, as laminated/tubular woven fabric, paper combined woven fabric, non-woven and etc.
Printing/cutting length set at will, No need to change any plate roller
360 Degrees adjusting print plate, online (in running) promptly quantitative adjusting device for horizontal & vertical positioning & print registering
Certificate
- ISO9001:2008 Quality System Certificate and CE approval
Main Products
printing machine,coating machine,printing machine for woven bags