Hydraulic Drive PDA
We have been manufacturing this type of PDA series planetary winches for more than ten years, these PDA hydraulic winches feature is as below:
Wide Range of Pulling Force
Hoisting application, line pull 13 kN to 650 kN. Controlled free fall application, line pull 6,5 kN to 325 kN.
Calculation according to FEM
The output torques T, is based on FEM-stan- dards I and IX as well as DIN 15020. Load conditions L3,
running time classification T5, according drive unit group M5. Ambiant temperature + 20°C.
Gear tooth forms
Selected for optimum tooth flanks and root strength and also for minimum sliding velocity, as per DIN 3990. External gear teeth are case hardened and ground, internal gears are annealed and nitride hardened.
Bearings
All gearbox elements are fitted with anti-friction bearings, needle roller or cylindrical roller bearings for the planetary gearboxes.
Type/Model Pulling Force (daN) Speed (m/min) Disp. (ml/r) Pressure (bar) Flow (l/min) Dia. (mm) Capacity (m) hydraulic motor Ratio
PDA2T 2,000 100 1,487 208 130 14 164 A2FE56 26.5
PDA2.5T 2,500 100 1,487 261 130 14 164 A2FE56 26.5
PDA3T 3,000 82 1,750 267 125 16 144 A2FE56 31.2
PDA3.5T-A 3,500 68 2,104 266 125 16 144 A2FE56 37.5
PDA4T 4,000 68 2,363 270 140 16 144 A2FE63 37.5
PDA3.5T-B 3,500 35 1,618 229 73 16 65 A2FE32 50.6
PDA4T 4,000 35 1,618 262 73 16 65 A2FE32 50.6
PDA4.5T 4,500 35 1,618 294 73 16 65 A2FE32 50.6
PDA5T 5,000 35 2,306 234 101 16 65 A2FE45 50.6
PDA5.5T-A 5,500 35 2,306 258 101 16 65 A2FE45 50.6
PDA5.5T-B 5,500 47 3,349 276 127 18 102 A2FE56 59.7
PDA6T-A 6,000 43 3,612 280 125 20 92 A2FE56 64.4
PDA6.5T 6,500 40 3,902 281 125 20 92 A2FE56 69.6
PDA7T-A 7,000 36 4,381 271 126 22 85 A2FE56 78.1
PDA7.5T-A 7,500 33 4,751 268 125 22 85 A2FE56 84.7
PDA6T-B 6,000 41 3,808 271 126 18 129 A2FE56 67.9
PDA7T-B 7,000 36 4,404 275 127 20 117 A2FE56 78.5
PDA8T 8,000 36 4,946 280 143 20 117 A2FE63 78.5
PDA9T 9,000 28 5,560 281 125 22 108 A2FE56 99.1
PDA10T-A 10,000 28 6,243 280 139 24 100 A2FE63 99.1
PDA10T-B 10,000 37 6,914 281 179 26 82 A2FE80 86
PDA11T 11,000 34 7,638 279 182 26 82 A2FE80 95
PDA12T 12,000 28 9,182 254 180 26 82 A2FE80 114.2
PDA13T 13,000 28 9,182 276 179 26 77 A2FE80 114.2
PDA14T 14,000 24 10,725 254 179 26 77 A2FE80 133.4
PDA15T 15,000 49 12,928 279 358 26 188 A2FE160 80.6
PDA16T 16,000 48 13,426 287 363 28 176 A2FE160 83.7
PDA17T 17,000 40 15,799 260 354 30 166 A2FE160 98.5
PDA18T 18,000 40 15,799 276 354 32 156 A2FE160 98.5
PDA20T 20,000 35 18,205 267 355 34 148 A2FE160 113.5
PDA20T-B 20,000 30 20,225 286 284 34 220 A2FE125 161.8
PDA25T 25,000 23 26,350 275 283 36 209 A2FE125 210.8
PDA30T 30,000 20 31,375 278 293 38 199 A2FE125 251
PDA32T 32,000 23 33,812 276 362 40 190 A2FE160 210.8
PDA35T-A 35,000 20 40,260 254 374 42 183 A2FE160 251
PDA35T-B 35,000 22 39,442 293 359 44 199 A2FE160 245.9
PDA40T 40,000 18 46,997 281 349 46 192 A2FE160 293
PDA45T 45,000 18 52,740 281 391 48 185 A2FE160 293
PDA48T 48,000 18 56,340 281 417 50 178 A2FE180 313
PDA50T 50,000 18 56,340 293 416 50 178 A2FE180 313
Wide Range of Pulling Force
Hoisting application, line pull 13 kN to 650 kN. Controlled free fall application, line pull 6,5 kN to 325 kN.
Calculation according to FEM
The output torques T, is based on FEM-stan- dards I and IX as well as DIN 15020. Load conditions L3,
running time classification T5, according drive unit group M5. Ambiant temperature + 20°C.
Gear tooth forms
Selected for optimum tooth flanks and root strength and also for minimum sliding velocity, as per DIN 3990. External gear teeth are case hardened and ground, internal gears are annealed and nitride hardened.
Bearings
All gearbox elements are fitted with anti-friction bearings, needle roller or cylindrical roller bearings for the planetary gearboxes.
Type/Model Pulling Force (daN) Speed (m/min) Disp. (ml/r) Pressure (bar) Flow (l/min) Dia. (mm) Capacity (m) hydraulic motor Ratio
PDA2T 2,000 100 1,487 208 130 14 164 A2FE56 26.5
PDA2.5T 2,500 100 1,487 261 130 14 164 A2FE56 26.5
PDA3T 3,000 82 1,750 267 125 16 144 A2FE56 31.2
PDA3.5T-A 3,500 68 2,104 266 125 16 144 A2FE56 37.5
PDA4T 4,000 68 2,363 270 140 16 144 A2FE63 37.5
PDA3.5T-B 3,500 35 1,618 229 73 16 65 A2FE32 50.6
PDA4T 4,000 35 1,618 262 73 16 65 A2FE32 50.6
PDA4.5T 4,500 35 1,618 294 73 16 65 A2FE32 50.6
PDA5T 5,000 35 2,306 234 101 16 65 A2FE45 50.6
PDA5.5T-A 5,500 35 2,306 258 101 16 65 A2FE45 50.6
PDA5.5T-B 5,500 47 3,349 276 127 18 102 A2FE56 59.7
PDA6T-A 6,000 43 3,612 280 125 20 92 A2FE56 64.4
PDA6.5T 6,500 40 3,902 281 125 20 92 A2FE56 69.6
PDA7T-A 7,000 36 4,381 271 126 22 85 A2FE56 78.1
PDA7.5T-A 7,500 33 4,751 268 125 22 85 A2FE56 84.7
PDA6T-B 6,000 41 3,808 271 126 18 129 A2FE56 67.9
PDA7T-B 7,000 36 4,404 275 127 20 117 A2FE56 78.5
PDA8T 8,000 36 4,946 280 143 20 117 A2FE63 78.5
PDA9T 9,000 28 5,560 281 125 22 108 A2FE56 99.1
PDA10T-A 10,000 28 6,243 280 139 24 100 A2FE63 99.1
PDA10T-B 10,000 37 6,914 281 179 26 82 A2FE80 86
PDA11T 11,000 34 7,638 279 182 26 82 A2FE80 95
PDA12T 12,000 28 9,182 254 180 26 82 A2FE80 114.2
PDA13T 13,000 28 9,182 276 179 26 77 A2FE80 114.2
PDA14T 14,000 24 10,725 254 179 26 77 A2FE80 133.4
PDA15T 15,000 49 12,928 279 358 26 188 A2FE160 80.6
PDA16T 16,000 48 13,426 287 363 28 176 A2FE160 83.7
PDA17T 17,000 40 15,799 260 354 30 166 A2FE160 98.5
PDA18T 18,000 40 15,799 276 354 32 156 A2FE160 98.5
PDA20T 20,000 35 18,205 267 355 34 148 A2FE160 113.5
PDA20T-B 20,000 30 20,225 286 284 34 220 A2FE125 161.8
PDA25T 25,000 23 26,350 275 283 36 209 A2FE125 210.8
PDA30T 30,000 20 31,375 278 293 38 199 A2FE125 251
PDA32T 32,000 23 33,812 276 362 40 190 A2FE160 210.8
PDA35T-A 35,000 20 40,260 254 374 42 183 A2FE160 251
PDA35T-B 35,000 22 39,442 293 359 44 199 A2FE160 245.9
PDA40T 40,000 18 46,997 281 349 46 192 A2FE160 293
PDA45T 45,000 18 52,740 281 391 48 185 A2FE160 293
PDA48T 48,000 18 56,340 281 417 50 178 A2FE180 313
PDA50T 50,000 18 56,340 293 416 50 178 A2FE180 313
Main Products
Hydraulic Winch, GFT Travel Drive, GFT-W Winch Drive,GFB Swing Drive