Ignition Coil Tester & Connector Kit BIG8130
To operate gasoline engine have to accompany with ignition system, is combined by ignition coil, high tension cable, spark plug, distributor, ignition amplifier, etc. The coil produce the power of high voltage surge, it is the most difficult part to diagnose ignition coil, particularly when problems are intermittent. The BIG8130 can help you to judge the defect accurate and rapidly.
Function:
1.To auto-distinguish the different of the ignition coil and auto-switch the contacting way.
2.Contacting control can adjust slow and fast as your demand. Frequency 180-12000 RPM.
3.Safety protection design and against mistake for security
Aplication of Operation
Use 12V car power. When connect the power, the red indicator light is lighting.
To connect the yellow banana socket with negative (-) or control terminal of ignition coil.
Switch of ignition frequency. Adjust this switch fast or slow for your demand
Adjust to the lowest frequency; observe spark color should be purple blue color
Observe the spark. Normal it is a straight line and no gap; maybe it is leakage or ageing coil if spark is curve.
Turn it to high frequency until the coil slightly heat.
Then turn it to low frequency, observe the spark is continuous or separated.
Hear voice but do not find the spark, it means coil is leakage inside.
Use the LEAKAGE CURRENT CATCHER to check leakage or not
To operate gasoline engine have to accompany with ignition system, is combined by ignition coil, high tension cable, spark plug, distributor, ignition amplifier, etc. The coil produce the power of high voltage surge, it is the most difficult part to diagnose ignition coil, particularly when problems are intermittent. The BIG8130 can help you to judge the defect accurate and rapidly.
Function:
1.To auto-distinguish the different of the ignition coil and auto-switch the contacting way.
2.Contacting control can adjust slow and fast as your demand. Frequency 180-12000 RPM.
3.Safety protection design and against mistake for security
Aplication of Operation
Use 12V car power. When connect the power, the red indicator light is lighting.
To connect the yellow banana socket with negative (-) or control terminal of ignition coil.
Switch of ignition frequency. Adjust this switch fast or slow for your demand
Adjust to the lowest frequency; observe spark color should be purple blue color
Observe the spark. Normal it is a straight line and no gap; maybe it is leakage or ageing coil if spark is curve.
Turn it to high frequency until the coil slightly heat.
Then turn it to low frequency, observe the spark is continuous or separated.
Hear voice but do not find the spark, it means coil is leakage inside.
Use the LEAKAGE CURRENT CATCHER to check leakage or not
Main Products
Automotive Diagnostic Tools, Brake fluid tester