Tunnel car wash machine
Zonda channel washing machine employs the advanced Italian technic, not only saving the power but also reducing the noise and guaranteeing the effect of drying. Channel washing machine can be used for the large amount of washing cars in car washing center, gas station and auto maintenance center. It is available for washing car, jeep and microbus (height below 2.2m), with the function of automatic inspection, spraying, washing, waxing, drying, and chassis washing, ect.
III. Technic Parameter:
1、outside dimension（L×W×H）mm：15000×3760×3100
2、max size of washed car（W×H）mm：2100×2200
3、moving speed（m/min）：5-6
4、power（V/HZ）：380V/50HZ three phase four wires
5、power consumption（kw）：42.5kw
6、average water consumption:（L/car）：120L
7、max washing ablility per hour（car）：100 cars
IV. Spare Parts
1. Conveyer belt (one set): moving sped (m/min): 5-6
2. Side brush (four sets): to wash middle of each side of the car and the wheel
3. Top brush (horizontal) (one set): to wash the whole top of the car
4. Traveling big side brush (two sets): to wash each side of the car and the end.
5. Big side brush (two sets): to wash each side of the car and the end.
6. Automatic dry system (horizontal)(two fans): to dry the top of the car
7. Automatic dry system (vertical): to dry the side of the car
8. Wheel guide system: to make the car enter into the booth
9.Automatic water spraying system: high pressure pump and some electromagnetism valves, controlled by the computer to save the water.
10. One set of spraying system: employed to spray the shampoo or wax on the surface of washed vehicles.
11. Shampoo and waxing
12. Chassis cleaner: to wash the chassis of the car with the different power, which is adjustable.
13. Booth body (one set)
14. Water treatment system: (optional)
V. Working principle
The tunnel washing is controlled by the computer. The track starts to work after the computer sends the instruction to the machine and all the other systems on the initialization instruction, when the car stops at the beginning of the track.Then the car enters into the washing booth, starting all the programes of the computer such as spraying, washing, waxing, and drying. The car enters into the machine one by one.
IV. Features
1、Adopting the Italian technic，and European outter design, with the advanced capability and performance.
2、All the brushes are imported from Italy, guaranteeing to avoid any damage to the car surface. Each set could be used for 100,000 cars with a long using life.
3、It could be available for washing so many kinds of automobile, with using time of twenty years.
4、The main components are imported from European countries, with the good qulity and long using life.
5、Saving the powe, it only cost at most RMB two for each car.
6、Using four fans to dry so that the car could be dried quickly.
III. Technic Parameter:
1、outside dimension（L×W×H）mm：15000×3760×3100
2、max size of washed car（W×H）mm：2100×2200
3、moving speed（m/min）：5-6
4、power（V/HZ）：380V/50HZ three phase four wires
5、power consumption（kw）：42.5kw
6、average water consumption:（L/car）：120L
7、max washing ablility per hour（car）：100 cars
IV. Spare Parts
1. Conveyer belt (one set): moving sped (m/min): 5-6
2. Side brush (four sets): to wash middle of each side of the car and the wheel
3. Top brush (horizontal) (one set): to wash the whole top of the car
4. Traveling big side brush (two sets): to wash each side of the car and the end.
5. Big side brush (two sets): to wash each side of the car and the end.
6. Automatic dry system (horizontal)(two fans): to dry the top of the car
7. Automatic dry system (vertical): to dry the side of the car
8. Wheel guide system: to make the car enter into the booth
9.Automatic water spraying system: high pressure pump and some electromagnetism valves, controlled by the computer to save the water.
10. One set of spraying system: employed to spray the shampoo or wax on the surface of washed vehicles.
11. Shampoo and waxing
12. Chassis cleaner: to wash the chassis of the car with the different power, which is adjustable.
13. Booth body (one set)
14. Water treatment system: (optional)
V. Working principle
The tunnel washing is controlled by the computer. The track starts to work after the computer sends the instruction to the machine and all the other systems on the initialization instruction, when the car stops at the beginning of the track.Then the car enters into the washing booth, starting all the programes of the computer such as spraying, washing, waxing, and drying. The car enters into the machine one by one.
IV. Features
1、Adopting the Italian technic，and European outter design, with the advanced capability and performance.
2、All the brushes are imported from Italy, guaranteeing to avoid any damage to the car surface. Each set could be used for 100,000 cars with a long using life.
3、It could be available for washing so many kinds of automobile, with using time of twenty years.
4、The main components are imported from European countries, with the good qulity and long using life.
5、Saving the powe, it only cost at most RMB two for each car.
6、Using four fans to dry so that the car could be dried quickly.
Main Products
paint booth,car wash machine,tyre changer,car lift,wheel balancer,etc.