GVE-T-g.703 e1 to 10base-t Ethernet converter network communication equipment
Features & Benefits
>>High-powered Ethernet bridge converter to expand Ethernet transmitting distance and using range.
>> Ethernet UTP interface has function of VLAN802.1Q. There have two transmitting mode to choose: data and image.
>> 10 Base-T(UTP) LAN interface accords with IEE802.3/Ethernet work mode: full duplex/ half duplex physical interface: shielded RJ-45 across and direct connection optional
>>G.703 can be framed N*64Kbps(N=1-31) and unframed 2048Kbps which are named fractional and unfractional apartly. Under the framed mode, it sustains alternative CRC4 ON/OFF, CAS/CCS (30 & 31 time slot). Transmitting clock can be recovered from receiving signal in G.703 lines and also can work in internal clock mode.
>>GVE-T satisfies requirements of G.703, G.704, G.706 of ITU.
>>GVE-T has local and remote loopback. Consumer can test lines and diagnose faults conveniently to perform integrality test port-to-port.
>>Many director LEDs on the front panel display work state and alarm signal of equipment.
>>G.703 line interface: impedance 120ohm(RJ45)/75ohm(BNC) optional
>>having two kinds of machine model: standalone and rack mountable power supply: -48VDC or 220VAC

GVE-T-g.703 e1 to 10base-t Ethernet converter network communication equipment
optional Overview
GVE-T is a converter that uses one E1 line to transmit Ethernet data from G.703 to Ethernet Bridge for the purpose of expanding transmission distance and applicable range of Ethernet. It is developed with ASIC circuitry design technology. It is collocated with E1/G.703 as line interface. G.703 can be either framed N*64Kbps (N=1-31) or unframed 2048Kbps, which are also known as fractional and unfractional respectively. Under the framed mode, it supports choices of CRC4 ON/OFF and CAS/CCS (30 & 31 time slot). Transmission clock can be recovered from receiving signals in G.703 lines and can also work in inner clock mode.
The Ethernet UTP interface of GVE-T has VLAN802.1Q function.
GVE-T satisfies the requirements of G.703, G.704&G.706 of ITU.
GVE-T has two transmission modes to choose from: data and image.
GVE-T has local and remote loop backs. Therefore user can use circuitry-test and malfunction diagnosis conveniently to perform port-to-port integrity test.
There is a rich set of indicator LEDs on the front panel to display work status and alarm signals.
GVE-T satisfies the requirements of G.703, G.704 and G.706 by ITU.
Ethernet UTP interface has VLAN802.1Q function.
GVE-T has two transmission modes to choose from: data and image.
GVE-T has local and remote loop backs. Therefore user can use circuitry-test and malfunction diagnosis conveniently to perform port-to-port integrity test.

GVE-T-g.703 e1 to 10base-t Ethernet converter network communication equipment
Typical Application
LAN Table:
10000, automatic learning and
refreshing
Filtering and Forwarding:
30000 frames/second
Buffer size:
64M
Throughput Delay:
1 frame
VLAN:
VLAN has 802.1Q
Standard:
according with IEE802.3/Ethernet
Work mode:
full duplex/ hale duplex
Data speed :
10Mbps
Physical interface:
10 BaseT(UTP)
10BaseT(UTP)shield RJ-45
Line transmission speed:
N*64Kbps(N=1--31) 2048Kbps
Line coding options:
HDB3
Format of line frame :
G.703(framed/unframed)
Line interface :
impedance120ohm,RJ45
impedance 75ohm, BNC
Transmission Features:
according with G.703
Speed of data transmission:
N*64Kbps(N=1--31)
Transmission mode:
synchronization
Clock:
master clock slave-clock line
G.703 clock
Testing mode:
local analogy loop back
remote digital loop back
Power supply:
220VAC +/- 10% 50Hz
48VDC+/-10% 50Hz
Power consumption:
5W
Volume:
225mm*145mm*40mm
9"L*5.8"W*1.6"H
Temperature:
0oC ~40oC
Humidity:
0~95%
GVE-T-g.703 e1 to 10base-t Ethernet converter network communication equipment
GVE-T-g.703 e1 to 10base-t Ethernet converter network communication equipment