GSK980Mda
GSK980MDa is a new product based on GSK980MD upgraded software and hardware. It can control five feeding axes (including C axis), two analog spindles, 2ms
interpolation in high speed, 0.1um precision, which obviously improve the efficiency, precision and surface quality of processing parts. New USB interface,
it supports the file operation and program running in flash disk. It provides 26 cycle commands of rigid tapping, drilling, boring, milling, etc. It supports
the macro command in sentence type and calls the macro program with parameter. The command function is powerful, convenient and flexible programming. As
GSK980MD upgraded product, GSK980MDa is the best choice of CNC drilling machine and CNC drilling machine for the technical upgrading.

1-The five axes of X, Z, Y, 4th and 5th control, any three axes linkage movement, the axial name and the axial type of 4th and 5th can be defined.
2-2ms interpolation cycle, the precision of 1um or 0.1um can be selected.
3-Maximum speed: 60m/min (When it is 0.1um, the maximum speed is 24m/min)
4-Multiple functions, it can realize the drilling/boring, roughing of round groove/rectangle groove, finishing of full circle/rectangle, continuous drilling
of straight line/rectangle/arc, etc.
5-Adapted servo spindle can realize spindle continuous position, rigid tapping function
6-Built-in many PLC programs, running PLC programs can be selected.
7-Memory capacity: 40M, total 10,000 part programs.
8-Support macro command programming in sentence type and the calling of macro program with the parameter.
9-Support metric system/inch system, with the function of auto beveling and tool life management
10-Display in Chinese, English, Spanish, and Russian, which is selected by the parameter.
11-With USB interface, support USB file processing, system configuration and software upgrade
12-DNC in high speed, realize part program real-time transmission processing
13-Analog voltage output of 0V~10V in two channels, support two-spindle control.
14-Electronic MPG output in one channel, support hand MPG.
15-Common input in 40 points/output in 32 points
16-Overall installation dimension and command system are completely compatible with GSK980MD.

Technical specification
1-Control axes
2-Control axes: 5 axes (X, Z, Y, 4th and 5th)
3-Interpolation axes: X, Y, Z, 4th and 5th linear interpolation. X,Y and Z three axes linear and spiral interpolation, any two axes arc interpolation.
4-PLC control axes: 5 axes
5-Feeding axis function
6-Minimum command unit: 0.001mm or 0.0001mm can be selected
7-Position command range: ±99999999 × minimum command unit
8-Rapid traverse speed: When the command unit is 0.001mm, the maximum speed is 60m/min. 0.0001mm, the maximum speed is 24m/min.
9-Rapid override: F0, 25%, 50% and 100%, total four levels, real-time adjustment.
10-Feeding override: total 16 levels: 0~150%, real-time adjustment.
11-Interpolation mode: linear, arc and spiral interpolation and rigid tapping
12-Auto chamfering
13-Acceleration and deceleration function
14-Cutting feeding: Acceleration or deceleration in linear type/index type or front/rear is selectable.
15-Rapid traverse: Acceleration or deceleration in linear type/index type or front/rear is selectable.
16-Tapping: Acceleration or deceleration in linear type/index type or front/rear is selectable.
17-The starting speed, finishing speed and time of acceleration and deceleration are set by the parameter.
18-Spindle function
19-Analog voltage 0V~10V output in two channels, support two-spindle control
20-Spindle encoder feed back in one channel, the resolution of spindle encoder can be set (0 or 100p/r~5000p/r)
21-Transmission ratio between encoder and spindle is:(1~255):(1~255)
22-Spindle speed: It is specified by S code or PLC signal, the speed range is 0rpm~9999rpm.
23-Spindle override: total 8 levels: 50%~120%, real-time adjustment
24-Spindle constant surface speed control
25-Tapping cycle/rigid tapping
26-Tool function
27-Tool length compensation
28-Tool radius compensation (C type)
29-Tool wearing compensation
30-Tool life management
31-Precision compensation
32-Backlash compensation
33-Pitch error compensation in memory type
34-PLC function
35-PLC program in two levels, maximum 5,000 steps, the refresh cycle of the 1st level program: 8ms.
36-PLC program communication download
37-Support PLC warning and PLC alarm
38-Support many PLC programs (maximum 16), the current running PLC program can be selected
39-Basic I/O: input in 40 points/output in 32 points
40-Man-machine interface
41-7.4″large screen LCD, the resolution is 234×480
42-Display in Chinese, English, Spanish or Russian, etc
43-Display in processing path and it can real-time zoom in and out, translation and scroll lock.
44-Real-time clock
45-Operation management
46-Operation mode: Edit, auto, MDI, machine zero-return, MPG/single step, manual and DNC.
47-Operation authority of multiple levels management
48-Alarm record
49-Editing program
50-Program capacity: 40M, 10,000 programs (including subprograms, macro programs)
51-Editing function: program/block/characters research, rewrite and delete
52-Program format: ISO code, support macro command programming in sentence type
53-Calling program: It supports macro program with parameter, subprogram nesting of 4 layers
54-Communication function
55-RS232: Files of part program and parameter, etc can be transmitted in two-way, DNC real-time processing, support PLC program, serial ports of system
software upgrade.
56-USB: File operation, directly processing files, support PLC program, system software upgrade in flash disc.
57-Safety function
58-Emergency stop
59-Hardware travel limit
60-Software travel limit
61-Data restoring and recovering