combination woodworker
As a manufacturer ,A combination woodworker is exactly what is says it is ,a combination of planer /thicknesser ,sawbench,spindle moulder and mortiser ,all in one compact and multifuction unit.
The machine tables are all made of cast iron for strength on a steel fabricated base unit.The fences are made of extruded aluminum and are fully adjusted .The machine has dust extraction hoods or outlets on each function each of which has a 100mm outlet adn requires a dust colletor.The machine has a weight of some 235kgs,which achives much stable performance.
The machine has two independent motors ,each one dedicated to one of the above functions and controlled by use of switch console,and a number of switches situated around the machine closed by each working station.
Planer/Thicknesser
The planer has a 250mm wide bed adn can be used to straighten timber and plane it with two saquare edges prior to thicknessing.The cutter block has a speed of 4000 rpm and it is fitted with three re-sharpen -able knives giving a very clean finish.For chamfers the planer fence can be angled over to a maximum of 45 degrees .Whilst surfacing or planning the dust hood sits beneath the machine,collecting the chips (and should be used with a suitable dust collector).To undertake thicknessing the tables are raised and the hood relocated allowing timber up to 250x180mm in size to be accurately dimensioned .The timber is fed by feed rollers at a fixed speed of 8 meters per minute.
Sawbench
The saw will accept a 200mm diameter blade the machine is supplied with a rip blade .There are many different types of applications that should be considered before fitting the blade .These are ripping ,cross-cutting and fine cutting of man made materials such as MDF.
Spindle Moulder
The machine has a 30mm spindle which has a single speed of 7600rpm.Again ,because there are so many different types of cutter block ,the machine is not supplied with a cutter block.Fitted to the machine is a fully adjustable guard,which has an independently adjustable fence.One top of the guard are hole down adn hold in sprung guards that keep the material firmly against the table and moulder fences .The recess in the table is called the well and will accept tooling up to 140mm in diameter.
SPECIFICATIONS
Motor-1# 1100W,50HZ,1ph,TEFC motor
Motor-2# 1100W,50HZ,1ph,TEFC motor,R+L
PLANER THICKNESSER
Planer table size (mm) : 250x1085
Thicknesser table size (mm): 250x600
Cutter block dia.(mm) : 75
Feeding block dia. (mm) :32
Cutting knife (pcs) :3
Fence tilt : 0 degree to 45 degrees
Dust chute dia.(mm) : 100
Max planer width (mm) : 250
Max cutting depth (mm) : 2.5
Max thicknesser height (mm) :180
Cutter block speed (rpm) : 4000
Feed speed (m/min) : 8
SAWBENCH
Blade speed (rpm) : 4050
Blade size (mm) : 250x30x2.2x20
Table size (mm) : 950x790(1060)
Max cutting height (mm) : 85 (90 degrees)
60 (45 degrees)
SPINDLE MOULDER
( tooling not supplied)
Spindle speed (rpm) : 6600
Spindle dia. : 30
Spindle travel (mm) : 90
Max cutter dia (mm) : 130
MORTISING
Bit housing (mm) : 17
Table size (mm) : 161x368
Vertical stroke (mm) : 0-180
Lateral stroke (mm) : 0-140
Table travel up/down (mm) 0-160
MISCELLANEOUS
Comlete unit packing size (mm) : 1160x1425x1180
Net /gross weight (kgs) : 260/292
20' container (pcs) : 20
Indivisual pack for sawbench/Spindle moulder
Packing size (mm) : 1090x568x853
N.G .weight (kgs) : 103/120
20' container (pcs 0 : 40
The machine tables are all made of cast iron for strength on a steel fabricated base unit.The fences are made of extruded aluminum and are fully adjusted .The machine has dust extraction hoods or outlets on each function each of which has a 100mm outlet adn requires a dust colletor.The machine has a weight of some 235kgs,which achives much stable performance.
The machine has two independent motors ,each one dedicated to one of the above functions and controlled by use of switch console,and a number of switches situated around the machine closed by each working station.
Planer/Thicknesser
The planer has a 250mm wide bed adn can be used to straighten timber and plane it with two saquare edges prior to thicknessing.The cutter block has a speed of 4000 rpm and it is fitted with three re-sharpen -able knives giving a very clean finish.For chamfers the planer fence can be angled over to a maximum of 45 degrees .Whilst surfacing or planning the dust hood sits beneath the machine,collecting the chips (and should be used with a suitable dust collector).To undertake thicknessing the tables are raised and the hood relocated allowing timber up to 250x180mm in size to be accurately dimensioned .The timber is fed by feed rollers at a fixed speed of 8 meters per minute.
Sawbench
The saw will accept a 200mm diameter blade the machine is supplied with a rip blade .There are many different types of applications that should be considered before fitting the blade .These are ripping ,cross-cutting and fine cutting of man made materials such as MDF.
Spindle Moulder
The machine has a 30mm spindle which has a single speed of 7600rpm.Again ,because there are so many different types of cutter block ,the machine is not supplied with a cutter block.Fitted to the machine is a fully adjustable guard,which has an independently adjustable fence.One top of the guard are hole down adn hold in sprung guards that keep the material firmly against the table and moulder fences .The recess in the table is called the well and will accept tooling up to 140mm in diameter.
SPECIFICATIONS
Motor-1# 1100W,50HZ,1ph,TEFC motor
Motor-2# 1100W,50HZ,1ph,TEFC motor,R+L
PLANER THICKNESSER
Planer table size (mm) : 250x1085
Thicknesser table size (mm): 250x600
Cutter block dia.(mm) : 75
Feeding block dia. (mm) :32
Cutting knife (pcs) :3
Fence tilt : 0 degree to 45 degrees
Dust chute dia.(mm) : 100
Max planer width (mm) : 250
Max cutting depth (mm) : 2.5
Max thicknesser height (mm) :180
Cutter block speed (rpm) : 4000
Feed speed (m/min) : 8
SAWBENCH
Blade speed (rpm) : 4050
Blade size (mm) : 250x30x2.2x20
Table size (mm) : 950x790(1060)
Max cutting height (mm) : 85 (90 degrees)
60 (45 degrees)
SPINDLE MOULDER
( tooling not supplied)
Spindle speed (rpm) : 6600
Spindle dia. : 30
Spindle travel (mm) : 90
Max cutter dia (mm) : 130
MORTISING
Bit housing (mm) : 17
Table size (mm) : 161x368
Vertical stroke (mm) : 0-180
Lateral stroke (mm) : 0-140
Table travel up/down (mm) 0-160
MISCELLANEOUS
Comlete unit packing size (mm) : 1160x1425x1180
Net /gross weight (kgs) : 260/292
20' container (pcs) : 20
Indivisual pack for sawbench/Spindle moulder
Packing size (mm) : 1090x568x853
N.G .weight (kgs) : 103/120
20' container (pcs 0 : 40
Main Products
brick splitter,site dumper, woodworking machinery tool, construction machinery, masonry saw, metal cutting bandsaw, tile cutter, dumper truck