Working Principle：
This product adopts the principle of monocrystal silicon PV solar panel and solar energy for power generation, recharge the built-in 700mAh/4.8v NI-HI battery, the storage power then be used for lighting and flashing, it also can recharged the mobile phone with charging cable.
Functions:
1. Recharge the built-in 700mAh/4.8v NI-HI battery by solar energy.
2. LED lighting:1LED on -3LEDs on -3LEDs flashing-off for a circle
3. The built-in NI-HI battery can charge mobile phone directly also with an indicator lighting when charging.
Main technical parameter:
ITEM PARAMETER UNIT ITEM PARAMETER UNIT
Max. brightness Max charging current of solar-energy
(1 pc solar panel )
40
mA
1LED 60000 Mcd
3LEDs 150000 Mcd Max charging current of solar-energy
(2 pcs solar panel)
80
mA
Max. Luminous flux
Max charging current of solar-energy
(3 pcs solar panel)
120
mA
1LED
4.5
Lm
3LEDs 11 Lm Flash frequency 2 HZ
Lighting time after fully charged LED lifetime 50000 Hour
1LED 50 Hour Switch lifetime 10000 Time
3LEDs 20 Hour Plastic lifetime 5 Year
3LEDs flashing 50 Hour Whole unit lifetime 5 Year
Lighting time after 1 hour direct sunlight
1LED 15 Hour
3LEDs 6 Hour
3LEDs flashing 15 Hour
Use method:
1. Three charging models(charge by solar energy)
① Charged by 1 pcs solar panel : showing the solar panel as picture A, Then Put the front of it under the sun light to charge built in battery.
② Charged by 2 pcs solar panel : showing the solar panel as picture B, Then put the front of it under the sun light to charge built in battery.
③ Charged by 3 pcs solar panel : showing the solar panel as picture C, Then Put the front of it under the sun light to charge built in battery.
2. lighting
LED lighting model: 1LED on 3LEDs on 3LEDs Flashing-off for a circle.
3. Recharge mobile phone :
① Open the DC socket cover, insert one end of charging cable to products socket and plug opposite end to the mobile phone, then the built-in battery can charge mobile phone directly, the indicator will light when charging, more charging current more bright.
Note: if the mobile phone can not be charged, that means there is not enough power of NI-HI battery. At this time. the NI-HI battery must be recharged by the original electronic power firstly.
Cautions:
1. Avoid pointing the light at eyes
2. The pin must be inserting to the socket properly otherwise the electronic circuit will be disturbed.
3. This product is for emergency use only.
4. Strictly using the specified mobile phone cables to charge mobile phone, otherwise the mobile phone or its battery will also be damaged.
This product adopts the principle of monocrystal silicon PV solar panel and solar energy for power generation, recharge the built-in 700mAh/4.8v NI-HI battery, the storage power then be used for lighting and flashing, it also can recharged the mobile phone with charging cable.
Functions:
1. Recharge the built-in 700mAh/4.8v NI-HI battery by solar energy.
2. LED lighting:1LED on -3LEDs on -3LEDs flashing-off for a circle
3. The built-in NI-HI battery can charge mobile phone directly also with an indicator lighting when charging.
Main technical parameter:
ITEM PARAMETER UNIT ITEM PARAMETER UNIT
Max. brightness Max charging current of solar-energy
(1 pc solar panel )
40
mA
1LED 60000 Mcd
3LEDs 150000 Mcd Max charging current of solar-energy
(2 pcs solar panel)
80
mA
Max. Luminous flux
Max charging current of solar-energy
(3 pcs solar panel)
120
mA
1LED
4.5
Lm
3LEDs 11 Lm Flash frequency 2 HZ
Lighting time after fully charged LED lifetime 50000 Hour
1LED 50 Hour Switch lifetime 10000 Time
3LEDs 20 Hour Plastic lifetime 5 Year
3LEDs flashing 50 Hour Whole unit lifetime 5 Year
Lighting time after 1 hour direct sunlight
1LED 15 Hour
3LEDs 6 Hour
3LEDs flashing 15 Hour
Use method:
1. Three charging models(charge by solar energy)
① Charged by 1 pcs solar panel : showing the solar panel as picture A, Then Put the front of it under the sun light to charge built in battery.
② Charged by 2 pcs solar panel : showing the solar panel as picture B, Then put the front of it under the sun light to charge built in battery.
③ Charged by 3 pcs solar panel : showing the solar panel as picture C, Then Put the front of it under the sun light to charge built in battery.
2. lighting
LED lighting model: 1LED on 3LEDs on 3LEDs Flashing-off for a circle.
3. Recharge mobile phone :
① Open the DC socket cover, insert one end of charging cable to products socket and plug opposite end to the mobile phone, then the built-in battery can charge mobile phone directly, the indicator will light when charging, more charging current more bright.
Note: if the mobile phone can not be charged, that means there is not enough power of NI-HI battery. At this time. the NI-HI battery must be recharged by the original electronic power firstly.
Cautions:
1. Avoid pointing the light at eyes
2. The pin must be inserting to the socket properly otherwise the electronic circuit will be disturbed.
3. This product is for emergency use only.
4. Strictly using the specified mobile phone cables to charge mobile phone, otherwise the mobile phone or its battery will also be damaged.
Features
.It can charge mobile phoneMain Products
LED Flashlight,Torch,Electronic Gift,Outdoor Lighting,camping