Network Intelligent Burglar Alarm System
Main Features:
1. 12-zone (8 wireless and 4 wired), 8 wireless zone can expand up to 24 sensors.
2. Support to CONTACT ID, ADEMCO and KS6+2 monitoring center protocol
3. Access codes, 1 installer code, 1 master code, 8 common user codes and duress code.
4.Dial 5 telephone numbers (mobile and pager number). Alarm telephone is priority. ]
5. Compatible with DTMF and pulse dialing.
6. Phone line be cut or short-circuit will send an alarm. (Indicator or siren for optional)]
7. Remote Arm, Disarm, monitor, and on-site alarm setup.
8. Automatically learning code between Wireless PIR detector, remote controller and main console (8 wireless can up to 24 zones, and 8 remote controllers)
9. Wired zone responds speed (5ms-1000ms) and support (Normal Open, Normal Close and end of line resistance) at freedom.
10.Zone attribute can be program for fire alarm, medical alarm, emergency alarm at freedom. Each zone can be programmed with different remote controllers.
11.Two timers can be set to Arm/Disarm independently.
12.Voice pre-recorded.
13.Alarm delay (00-99 seconds) and Arm delay (00-99 seconds) can be set for corresponding zones.
14.Main unit disassembly, slave detector disassembly, AC power cut, backup battery lower and slave detector power lower will send alarm.
15.Work with wired/wireless Siren and linkage device.
16.Latest 20 pieces alarm can be recorded and can急 be deleted. Last Arm/Disarm time can be remembered.
17.Main unit and slave detector make communication times in 24 hour to check if there is communication malfunction. If there is a malfunction, the main console will alert corresponding zone within 26 hours.
18.Slave detector sends report to main unit once it is turn on. Main unit will indicate.
19.Both AC220V and 12V1.2AH storage battery power supply, and change automatically.
20.Telephone lightning-proof.
Main Features:
1. 12-zone (8 wireless and 4 wired), 8 wireless zone can expand up to 24 sensors.
2. Support to CONTACT ID, ADEMCO and KS6+2 monitoring center protocol
3. Access codes, 1 installer code, 1 master code, 8 common user codes and duress code.
4.Dial 5 telephone numbers (mobile and pager number). Alarm telephone is priority. ]
5. Compatible with DTMF and pulse dialing.
6. Phone line be cut or short-circuit will send an alarm. (Indicator or siren for optional)]
7. Remote Arm, Disarm, monitor, and on-site alarm setup.
8. Automatically learning code between Wireless PIR detector, remote controller and main console (8 wireless can up to 24 zones, and 8 remote controllers)
9. Wired zone responds speed (5ms-1000ms) and support (Normal Open, Normal Close and end of line resistance) at freedom.
10.Zone attribute can be program for fire alarm, medical alarm, emergency alarm at freedom. Each zone can be programmed with different remote controllers.
11.Two timers can be set to Arm/Disarm independently.
12.Voice pre-recorded.
13.Alarm delay (00-99 seconds) and Arm delay (00-99 seconds) can be set for corresponding zones.
14.Main unit disassembly, slave detector disassembly, AC power cut, backup battery lower and slave detector power lower will send alarm.
15.Work with wired/wireless Siren and linkage device.
16.Latest 20 pieces alarm can be recorded and can急 be deleted. Last Arm/Disarm time can be remembered.
17.Main unit and slave detector make communication times in 24 hour to check if there is communication malfunction. If there is a malfunction, the main console will alert corresponding zone within 26 hours.
18.Slave detector sends report to main unit once it is turn on. Main unit will indicate.
19.Both AC220V and 12V1.2AH storage battery power supply, and change automatically.
20.Telephone lightning-proof.
Certificate
- ISO9001:2000
- CE
Main Products
Satellite Communication, Digital Receivers, Burglar Alarms & Detectors