IMMERSION VIBRATOR, SHUTTER VIBRATOR, PLATFORM VIBRATOR,SREED BOARD VIBRATOR, VIBRATING TABLE & SHAFT
Specifications
- IMMERSION VIBRATOR
- 'villers' Petrol/Kerosene engine model 'Mark 12/2', 1.95 BHP or 'Mark 25', 3.4 BHP fitted on 360 degree swiveling C.I. Base with 2 lifting handles & direct drive coupling
- Low speed of Flexible shaft (3000 RPM) .High speed at work end (app.10000VPM)
- Light weight, easy operation.
- Low cost-High performance
- SHUTTER VIBRATOR
- External Portable Vibrators are available in sizes:
- 1] 0.5HP & 1HP, 3ph, 400/440 V, 50 Cy.AC
- 2] 0.5HP & 1HP,1 ph,220/230 V,50 Cy.AC
- Light in weight-low in cost-gives app.3000 VPM
- Ideal for the precast concrete industry,building & road construction
- PLATEFORM (PAN) VIRBATOR
- Driven by villiers petrol engine Model 'Mark 12/2',1.95 BHP, or by an electric motor 2HP,3PH 440V, 50 cy. AC 3000 RPM gives output vibration about 4000VPM
- The heavy duty vibrator head assembly fitted on a fabricated portable stand with steel pan size 18"*30".other size of pan available on specific requirements.
- Fitted with spring loaded vibrationless steel carrying handles on both sides.
- Ideal for reinforced concrete floors and for precast concrete articals where top pressure is especially useful.
- SCREED BOARD VIBRATOR
- The heavy duty vibrating head is V-belt drive unit driven by a spring loaded villiers petrol engine model Mark 12/2', 1.95 BHP or by an electric motor, 3 phase 440 V, 50 cy AC giving about 4000 VPM to the screed board the DOL starter is supplied with motorised machine.
- Two spring loaded steel handles with rubber grips eleminate the vibrations transmitted to the operators
- The machine produces about 4000VPM and is capable to compact about 15 ft wide slabs under normal conditions
- VIBRATING TABLE & VIBRATOR SHAFT
- VIBRATING TABLE
- Viriable speed merchanism gives variable vibration from 3000 to 12000 VPM to the table top
- No vibration on table base
- Load on the table does not effect load on power unit
- All welded design-No nuts or rivets to vibrate loose
- Highly density compaction
- Table top size 2'-6" * 3'-6".Other sizes available on specific requirements
- VIBRATOR SHAFT
- Spare flexible shafts,neeles, accessories and spares pars available
- Flexible shafts,needless and spares suitable to fit to 'Killicks','Ashok',Lynks' and other make of machines available to suit individual requirements.
Features
- INTERNAL CUM EXTERNAL VIBRATOR
- BASE:The power until and jackshaft assembly are mounted on a presssed steel turntable,capable of swivelling through 360 degree, the truntable having mounted on a pressed mild steel dished base. Two tubular lifting handles are fitted to the turntable.
- POWER UNIT: The drive is obtained by greaves Lombardini 4.4 b.h.p. diesel enginer or villiers MK-25,3.4 b.h.p. petrol engine or by a 3 hp totally enclosed electric motor
- TRANSMISSION: The transmission from the power unit to the jackshaft is through V belts and give a shaft speed of about 7000/10000 rpm continiously
- EXTERNAL VIBRATOR:
- To convert the internal vibrator into external vibrator,disconnect the needle and fix the rotor assembly in it's place. The rotor assembly when fixed to screed board, the machine is converted into external vibrator. With change of suitable pulleys on jackshaft assembly and prime mover, the frequency is 4000/5000 VPM and amplitude is 1.5mm approximately. The machine is suitable to vibrate flat surfaces as well as the inclined surfaces of canals, dams, reservoirs etc.
Main Products
HORIZONTAL METAL CUTTING BANDSAW MACHINE, FLEXIBLE SHAFT GRINDER KIT