ONE PIECE HAND LEVER SHEARS/TWO PIECE HAND LEVER SHEARS
Specifications
- IMPALA HAND OPERATED LEVER SHEARING
- MODEL 3/3R:
- M.S PLATES CUTTING CAP-UPTO 2 MM
- MAX CUT IN ONE STROKE 85 MM
- FLAT UPTO (M.S.) 40*4 MM
- ROUND UPTO (M.S.) 9 MM
- LENGTH OF BLADES 110 MM APPROX
- NETT WEIGHT 7/500 KGS
- MODEL 3/4R
- M.S PALTES CUTTING CAP UPTO 3 MM
- MAX CUT IN ONE STROKE 115 MM
- FLAT UPTO (M.S) 45*5 MM
- ROUND UPTO (M.S.) 9 MM
- LENGTH OF BLADES 150 APPROX
- NETT WEIGHT 11 KGS
- IMPALA HAND OPERATED ROD CUTTING MA
- MODEL 50/20
- Cap to cut round (m.s.) bar upto 18 mm
- square upto (m.s.) 15 mm
- Length of Blades (approx) 62 mm
- Nett weight 20 kgs approx
- Model 50/26
- Cap to cut round (m.s.) bar upto 25 mm
- square upto (m.s.) -25 mm
- Length of blades 75 approx
- Nett weight 44 kgs approx
- spares:Rod Cutting blades
- Model 50/26
- Cap to cut round (m.s.) bar upto 25 mm
- squre upto (m.s.) 25 mm
- Length of blades 75 aprox
- Net weight 44 kgs
- IMPALA HAND OPERATED,GEARED,HANDLEV
- Model 8/c
- cap to cut plates upto 6 mm
- Flat upto (m.s.) 50*8
- square upto (m.s.) 18mm
- Tee cutting cap (m.s.) 50*5
- Angle Cutting (m.s.) capacity in one cut 50*6
- Length of blades (approx) - 175
- Nett weight 58 kgs
- Model 8/CH
- cap to cut plates upto 7 mm
- Flat upto (m.s.) 60*9 mm
- Square upto (m.s.) 18 mm
- Tee cutting cap (m.s.) 55*5 mm
- Angle cutting (m.s.) capacity in one cut 62*6 mm
- length of blades approx 175 mm
- nett weight 68 kg
- IMPALA GEARED TYPE,HAND LEVER SHEAR
- MODEL 6/200
- M.S. Plates cutting cap-upto 3.5mm
- falt upto (m.s.) 40*6 mm
- round upto (m.s.) 13mm
- max cut in one stroke 150mm
- length of blades approx 175 mm
- nett weight: 22 kg
- Model 4/7R
- M.s.plates cutting cap-upto - 6 mm
- Flat upto (m.s.) - 75*8 mm
- Round upto (m.s.) - 16 mm
- Square upto (m.s.) - 16 mm
- Length of blades 178 mm approx
- Nett weight :40 kgs
- Spares:sheet cutting blades, ring blade round & ring blade square
- IMPALA HAND OPEARTED PUNCHING MACHI
- MODEL NO.10/6
- Cap to punch (m.s.) round dia 10mm
- upto thickness of plate 10 mm
- depth of gap 6 mm
- nett weight :20 kgs
- MODEL 16/10
- Cap to punch (m.s.) round dia 16 mm
- upto thickness of plate 10mm
- depth of gap 150 mm
- nett weight 73 kgs
- spares:
- Set of round die and punch state size required
- Set of square die and punch state size required
Main Products
HORIZONTAL METAL CUTTING BANDSAW MACHINE, FLEXIBLE SHAFT GRINDER KIT