ST-45 Double-use Network Cable Tester
Automatic scan mode,rapidly testing,test of twisted-pair and cables of the same axes need to switch on the power only.It has the novel configuration.The remote tester can be detached from main tester,and they also can unite.It adopts the PCV panel and the hidden flaring equipment,and adapts to test in working locale.
Technical Guideline:
TEST CABLE: RJ45,UTP/STP/FTP,BNC
POWER SUPPLY: DC 9V reduplicated battery
ELECTRICITY-CONSUMING: 25MA
BULK: 10.5*10.5*2.6 mm
WEIGHT: 200G
1. Switch on the power on the main tester.
2. Test of non-shielded double-twisted cables:If all the cables work,the lights will become green from No.1 & 2 to
No.7 & 8 sequently.If any light is not on or turns red or turns on unsequently,the cables are broken.
3. Test of shielded double-twisted cables:If all the cables work well,the lights become green from No.1 & 2 to
SHIELD & BNC sequently.If no,the cables broken.
4. Test of the cables of the same axes:If the cables work,SHIELD and BNC will turn green.Otherwise,the light is not
on.
5. If abnormal connection of any pair of cables can been observed ,the corresponding light is not on.And opposite
connection results in red light.
Automatic scan mode,rapidly testing,test of twisted-pair and cables of the same axes need to switch on the power only.It has the novel configuration.The remote tester can be detached from main tester,and they also can unite.It adopts the PCV panel and the hidden flaring equipment,and adapts to test in working locale.
Technical Guideline:
TEST CABLE: RJ45,UTP/STP/FTP,BNC
POWER SUPPLY: DC 9V reduplicated battery
ELECTRICITY-CONSUMING: 25MA
BULK: 10.5*10.5*2.6 mm
WEIGHT: 200G
1. Switch on the power on the main tester.
2. Test of non-shielded double-twisted cables:If all the cables work,the lights will become green from No.1 & 2 to
No.7 & 8 sequently.If any light is not on or turns red or turns on unsequently,the cables are broken.
3. Test of shielded double-twisted cables:If all the cables work well,the lights become green from No.1 & 2 to
SHIELD & BNC sequently.If no,the cables broken.
4. Test of the cables of the same axes:If the cables work,SHIELD and BNC will turn green.Otherwise,the light is not
on.
5. If abnormal connection of any pair of cables can been observed ,the corresponding light is not on.And opposite
connection results in red light.