Shafted Type (DL-1000/1300) - Yo Den Enterprises Co., Ltd.

Dry Laminating Machines

Shafted Type

Product ID: DL-1000/1300

Dry Laminating Machines Description:

	AIR SHAFT TYPE REWINDER
	SMOOTHING ROLL ．The smoothing roll is operated by air cylinder. ．An indexing handle provides micrometric adjustment of contact. Contact position is displayed easily. ．Smoothing roll features synchronized motion with pressure roll raising and is separated by material.
	CHAMBER DOCTOR SYSTEM ．No glue splashing during high speed operation. ．Minimum solvent odor. ．Easy to install and clean. ．Minimum variation of liquid viscosity. ．Long service life of doctor blade.
	OPEN DOCTOR BLADE SYSTEM
	DOUBLE-LAYER GLUE TANK ．The outer layer is equipped with an air suction device for sucking the solvent smell, which avoids odor splashing.
	SLEEVE TYPE COATING IMPRESSION ROLLER ．The sleeve type coating impression roller is fast to change to suit various material widths.
	INDIVIDUAL MOTOR DRIVE ．The coating rubber roller and the glue-coating mesh roller are driven by individual motors which avoids uneven coating resulting from slipping between the gluing roller and the material.
	DRYING MECHANISM ．The drying mechanism has 3 zones with a total length of 8.1 meters. ．The No. 1 zone located at the right employs V shaped nozzles for uniform hot air blowing. ．The No. 2 and No. 3 zones are located at the left and employ multi-holes board for high efficiency drying.

Model	DL-1000	DL-1300
Machine speed	200 M/min
Working speed	180 M/min
Laminating material	All kinds of web
Drying system	Electric heater (Gas, steam or thermal oli as optional) 1350mm
Drying tunnel length	2.7M x3 sections (8.1M)
Guide roller for drying tunnel	Ø90 mm, surface chrome plated. Driven by timing belt.
Coating system	Gravure type, individual motor drive
Adhesive pan	Stainless steel double-layer type (outer layer can absorb solvent smell)
Laminating roller	Mirror-effect treated, hot oil circulation
Max. unwind diameter	600mm
Max. rewind diameter	800mm
I.D. for rewind paper core	75mm (3")
Unwind material fixed method	Air shaft
Rewind material fixed method	Air shaft
preheating rollow	Optional
Guide roller type	Ø120mm., center type, Hard chrome coating
Ladder	Fixed type
max. material width	1100mm	1350mm
Coating roller width	1200mm	1400mm
Coating width range	400-1050mm	400-1300mm
Drying blower	3HP x 3 sets	5HP x 3sets
Exhaust blower as optional	10HP	15HP
Memory data	Optional	Optional

Slitting Machines, Rewinding Machines, Proofing Machine, Dry and Solventless Laminating Machine and Shrink Sleeve Converting Machinery

Dry Lamination Machine

Turret Type

Single Shaft Type

INSPECT-S , INSPECT-V

INSPECT-V600