Yo Den Enterprises Co., Ltd.
Dry Laminating Machines (Shaftless of Stand unit)
Description:
- for Plastic Laminating
- for flexible Packaging Converting.
 |
SHAFTLESS TYPE UNWINDER |
 |
SHAFTLESS TYPE REWINDER |
 |
INSERT TYPE BUSHING . Employs sleeve type chuck with tapered cone to hold material firmly with . Material width within 650mm. Can be clamped without the need of |
 |
SMOOTHING ROLL ．The smoothing roll is operated by air cylinder. ．An indexing handle provides micrometric adjustment of contact. Contact position is displayed easily. ．Smoothing roll features synchronized motion with pressure roll raising and is separated by material. |
 |
CHAMBER DOCTOR SYSTEM ．No glue splashing during high speed operation. ．Minimum solvent odor. ．Easy to install and clean. ．Minimum variation of liquid viscosity. ．Long service life of doctor blade. |
 |
OPEN DOCTOR BLADE SYSTEM |
 |
DOUBLE-LAYER GLUE TANK ．The outer layer is equipped with an air suction device for sucking the solvent smell, which avoids odor splashing. |
 |
SLEEVE TYPE COATING IMPRESSION ROLLER ．The sleeve type coating impression roller is fast to change to suit various material widths. |
 |
INDIVIDUAL MOTOR DRIVE ．The coating rubber roller and the glue-coating mesh roller are driven by individual motors which avoids uneven coating resulting from slipping between the gluing roller and the material. |
 |
DRYING MECHANISM ．The drying mechanism has 3 zones with a total length of 8.1 meters. ．The No. 1 zone located at the right employs V shaped nozzles for uniform hot air blowing. ．The No. 2 and No. 3 zones are located at the left and employ multi-holes board for high efficiency drying. |
| Model | DL-S1000 | DL-S1300 |
| Machine speed | 200 M/min | |
| Working speed | 180 M/min | |
| Laminating material | All kinds of web | |
| Drying system | Electric heater (Gas, steam or thermal oli as optional) 1350mm | |
| Drying tunnel length | 2.7M x3 sections (8.1M) | |
| Guide roller for drying tunnel | Ø90 mm, surface chrome plated. Driven by timing belt. | |
| Coating system | Gravure type, individual motor drive | |
| Adhesive pan | Stainless steel double-layer type (outer layer can absorb solvent smell) | |
| Laminating roller | Mirror-effect treated, hot oil circulation | |
| Max. unwind diameter | 600mm | |
| Max. rewind diameter | 800mm | |
| I.D. for rewind paper core | 75mm (3") | |
| Unwind material fixed method | Shaftess (Built-in extended sleeve) | |
| Rewind material fixed method | Shaftess (Built-in extended sleeve) | |
| preheating rollow | Hot water circulation | |
| Guide roller type | Ø120mm., center type, Hard chrome coating | |
| Ladder | Swing Type | |
| max. material width | 1100mm | 1350mm |
| Coating roller width | 1200mm | 1400mm |
| Coating width range | 400-1050mm | 400-1300mm |
| Drying blower | 3HP x 3 sets | 5HP x 3sets |
| Exhaust blower as optional | 10HP | 15HP |
Main Products
Slitting Machines, Rewinding Machines, Proofing Machine, Dry and Solventless Laminating Machine and Shrink Sleeve Converting Machinery
Contact Detail
-
AddressNo.112-59, Qingguang Rd., Wuri Dist., Taichung, Taiwan
-
Tel886-4-23358588
-
Fax886-4-23357358
-
E-mail
-
URL