Features

• Shape of chuck, work piece, tail-stock and cutter can display and indicate the relation location with dynamic simulation
• Definition of Tool:
• Left/right hand, font clearance, side clearance, side clearance and round nose's compensation of inner cutter and outer cutter
• Various angles and nose's radius of thread tool
• Width and fillet of grooving tool
• Form-cutter transplant from CAD system as drawing exchange file(DXF)
• Recognizable code:
• G(Preparatory) functions: G00, G01, G02, G03, G04, G20, TG21, G28, G29, G30, G33, G40, G41, G42
• Canned Cycles: G70, G71, G74, G75, G76, G77, G78, G79, G90, G92, G94, G95, G96, G97
• M(Auxiliary) functions: M00, M01, M02, M03, M04, M05, M07, M08, M09, M26, M27, M40, M41, M42, M98, M99
• Multi-language display, Chinese, English and other language if requested
• Have high-middle-low speed limit or constant surface control, when calculate the machine-hour
• Interpret mode can immediately display the shape changing according to desired instructions key-in.
• The result of simulation can translate to DXF(for CAD system Usage) and display as engineering drawing with continue line and hidden line.
• Can inverse and reclamp work piece for both sides simulation.
• Full-page-editor, support mouse driver and virture memory management.
• DNC with auto-x on/off and TV-Check.
• Versatile cutting emulation feature
• Provides cycle time calculation
• Provides stepping or continuous emulation modes
• Supports macros and subprogram calls
• Provides tool library function
• System requirement:
• IBMC or compatible(80286 and up)
• MS DOS or PC-DOS version 3.0 or later
• 640KB RAM minimum
• 2MB hard disk space
• Standard VGA display
• Mouse